ATEX compliant - SMC ETech

Series 56-EX500How to OrderInput manifoldInput blockATEX category 3EEX500Input unit specificationConnector typeE M8 connectorT M12 connectorM M8 and M12 mixed56 -123456IB1EX500 IE 11…4E 4Stations1 station…4 stationsBlock typeM8 connector, PNP specificationM8 connector, NPN specificationM12 connector, PNP specificationM12 connector, NPN specification8-point integrated type,M8 connector, PNP specifications8-point integrated type,M8 connector, NPN specificationsExampleM8 and M12 on a single manifoldInput block56-EX500-IE1 (2 sets)Unit sideInput block56-EX500-IE3 (2 sets)56-EX500-IB1EEX500-IB1-M4 ••••••• 1 set∗ 56-EX500-IE1 ••••••• 2 sets∗ 56-EX500-IE3 ••••••• 2 setsEnd block sideWhen ordering an input block manifold, enter theInput manifold part no. + Input block part no. together.The input block , end block and DIN rail are includedin the input manifold. Refer to How to Order below.Input Unit SpecificationsInput Block SpecificationsConnection blockCommunication connectorNumber of connection blocksBlock supply voltageBlock supply currentCurrent consumptionShort circuitprotectionEnclosureWeight (g) Note)Note) Not including the DIN rail weight.Current source type input block (PNP input block)orCurrent sink type input block (NPN input block)M12 connector (8 pins, plug)Maximum 4 blocks24 VDC0.3 A maximum100 mA or less (at rated voltage)1A Typ. for each unit (shut off power supply)To restart, remove power to the GW unit once,then reapply it.IP65100 (Input unit + end block)Applicable sensorSensor connectorNumber of inputsRated voltageLogical ''1''input voltageLogical ''0''input voltageLogical ''1''input currentLogical ''0''allowable currentInput delayIndicatorInsulationSensor supply currentAmbient operatingtemperature/humidityEnclosureWeight (g)Current source type(PNP output)M8 connector (3 pins) or, M12 connector (4 pins)2 inputs/8 inputs (M8 only)24 VDC15 V to 26.4 V0 V to 5 V5 mA Typ.1.5 mA1 m sec. or lessGreen LEDNot providedMaximum 30 mA/Sensor+5 to +45°C at 35% to 85% RH(without condensation)IP65Current sink type(NPN output)0 V to 8 V19 V to 26.4 V–5 mA Typ.–1.5 mA[For M8: 20] [For M12: 40] [8 point integrated type, for M8: 55]134