ATEX compliant - SMC ETech

ATEX Compliant Reed Switch/Direct MountingD-A90(V)/D-A93(V)-588GrommetNote) All other specifications(dimensions, drawings, etc.)are the same as the non ATEX type.SpecificationsD-A90, D-A90V (Without indicator light)Auto swich modle numberATEX CategoryApplicationLoad voltageMax. load currentContact protection circuitInternal resistanceD-A93, D-A93V (With indicator light)Auto switch model numberD-A93, D-A93VATEX CategoryApplicationLoad voltageMax. load current andload current rangeContact protection circuitInternal voltage dropIndicator lightLead wireD-A90(V)/D-A93(V)DimensionsPLC: Programmable Logic ControllerD-A90, D-A90VIC circuit/Relay/PLCACAC24V DC or less48V DC or less50mA40mANone1Ω or less (Including 3m lead wire)II 3GD EEx nA II T5 X -10°C≤Ta≤+60°C IP67Relay/PLC24V DC5 to 40mANone≤ 2.4V (up to 20mA)/≤ 3V (up to 40mA)ON: When red light emitting diodeOilproof vinyl heavy insulation cable, ø2.7, 0.18mm 2 X 2cores (Brown, Blue)This category 3 type autoswitch can only be used in zones 2 and 22.II 3GD EEx nA II T5 X -10°C≤Ta≤+60°C IP67D-A-588Internal Circuit( ): If not applicable for IEC StandardD-A90D-A90VD-A93, D-A93VReed switchReed switchLEDResistanceZener diodeBrown(Red)Blue(Black)ContactprotectiveboxCD-P11CD-P12ContactprotectiveboxCD-P11CD-P12OUT(±)Brown(Red)toOUT( )Blue(Black)±OUT(+)Brown(Red)toOUT(–)Blue(Black)9390Switch No.With indicator lampWithout indicator lampNo numberVElectrical entryIn linePerpendicularLead wire lengthNo numberLZSuffix forATEX certified CAT.30.5m3m5m (Except D-A90)Note) qIn the case operation load is an inductive load.wIn the case the wiring length to load is “>” 5m.Be sure to use the auto switch with the contact protectionbox in any case mentioned above.46