ATEX compliant - SMC ETech

Electro-Pneumatic PositionerSeries IP6000 (Lever type)Series IP6100 (Rotary type)II 2G EEx ib IIC T5/T6For more details, other specifications,dimensions, see the specific catalogue.IP6 0000 1 0How to OrderX14ATEX category 2Positioner type000100Lever typeRotary typePressure gauge (SUP, OUT1)123Specifications0.2MPa (R1/8)0.3MPa (R1/8)1.0MPa (R1/8)Accessories Note 1)Without accesoryNil(standard)With ø0.7 output restrictorAintegrated pilot valveWith ø1.0 output restrictorBintegrated pilot valveWith fork lever typeCfitting MXWith fork lever typeDfitting SXWith lever unit for aE35 to 100 mm strokeWith lever unit for aF50 to 140 mm strokeWith compensationGspring (A)With standard lever (10 to85 mm stroke) for IP6000Common to IP6000and IP6100 smallcapacity actuatorsOnly for IP6100Only for IP6000Common to IP6000and IP6100Note 1) If multiple accessories are required, they should beindicated in alphabetical order.ItemTypeInput currentInput resistanceSupply air pressureStandard strokeSensitivityLinearityHysteresisRepeatabilityThermal coefficientOutput flow rateAir consumptionAmbient and using fluidTemperatureExplosion protectedConstructionAir connection portElectric wiringconnection portMaterialMassClassification ofdegree of protectionParameters(Current circuit)IP6000IP6100Levery type leverRotary type camSingle action Double action Single action Double action4~20mADC (Standard) Note1235 ± 15Ω (4~20mADC)0.14~0.7Mpa10~85mm (External lever allowable60°~100°runout angle 10°~30°Note2Within 0.1%F.S.Within ±1%F.S.Within 0.75%F.S.Within 0.5%F.S.Within ±2%F.S.Within 1%F.S.Within ±0.5%F.S.Within 0.1%F.S./°C80l/min (ANR) or more (SUP.=0.14MPa) Note3Within 5l/min (ANR) (SUP.=0.4MPa)-20°C~80°C (T5)-20°C~60°C (T6)Intrinsic safety type of explosion protection( 0344 II 2G EEx ib II C T5/T6)Approval No. KEMA No.03 ATEX11191/4NPT female screwM20 x 1.5Aluminium diecast for the bodyApprox. 2.4kgJISF8007 IP55 (Conform to IEC pub.529)Ui ≤ 28V, Ii ≤ 125mA, Pi ≤ 1.2W, Ci ≤ OnF, Li ≤ OmHNote 1) 1/2 split range is possible with the standard type (by adjusting the span).Note 2) The stroke is adjustable in 0~60 and 0~100.Note 3) Standard air (JIS B0120): temp. 20°C, absolute press. 760mmHg, ratio humidity 65%.53