ATEX compliant - SMC ETech

ATEX Compliant Reed Switch/Band MountingD-C73/D-C80-588GrommetNote) All other specifications(dimensions, drawings, etc.)are the same as the non ATEX type.Internal Circuit( ): If not applicable for IEC StandardSpecificationsD-C7 (With indicator light)Auto switch model numberATEX CategoryApplicationLoad voltageMax. load current and rangeContact protection circuitInternal voltage dropIndicator lightD-C8 (Without indicator light)Auto switch model numberATEX CategoryApplicationLoad voltageMax. load currentContact protection circuitInternal resistancePLC: Programmable Logic ControllerD-C73II 3GD EEx nA II T5 X -10°C≤Ta≤+60°C IP67Relay/PLC24V DC5 to 40mANone≤ 2.4VON: When red light emitting diodeD-C80Relay/PLC/IC circuitACAC24V DC or less48V DC50mA40mANone1Ω or less (Including 3m lead wire)• This category 3 type autoswitch can only be used in zones 2 and 22.II 3GD EEx nA II T5 X -10°C≤Ta≤+60°C IP67D-C73Reed switchD-C80Reed switchLEDResistanceZener diodeBrown(Red)Blue(Black)ContactprotectiveboxCD-P11CD-P12ContactprotectiveboxCD-P11CD-P12OUT(±)Brown(Red)OUT( )Blue(Black)Note) q In the case operation load is an inductive load.w In the case the wiring length to load is more than5m.Be sure to use the auto switch with the contact protectionbox in any case mentioned above.±OUT(+)Brown(Red)OUT(–)Blue(Black)How to order7380D-CSwitch No.With indicator lampWithout indicator lampLead wire lengthNo numberLZ-588Suffix forATEX certified CAT.30.5m3m5m (Except D-C80)43