ATEX compliant - SMC ETech

MASMCOUSeries IP8000 / 8100Accessory / OptionPilot valve with output restriction (IP8000, 8100 type)In general, mounting on a small-size actuator may cause hunting. Forprevention, a pilot valve with a built-in output restriction is available.The restriction is removable.(Ambient temperature: Standard)Actuator Capacity Orifice size Part number90cm 3180cm 3ø0.7ø1P36801080P36801081Fork lever joints (IP8100 type)Pilot unit part numberP565010-18P565010-19Two types of the fork lever joints are available dependent upondifferent mounting dimensions.This is recommended because it can absorb off-centering, comparedwith direct mounting type.Part nameFork lever assembly MXFork lever assembly SXPart numberP368010-36P368010-37External feedback lever (IP8000 type)Different feedback levers are available dependent upon valvestrokes. Consult with SMC in case of 10mm or less stroke.Stroke10 to 85mm (Accessory “Nil”)35 to 100mm (Accessory “E”)50 to 140mm (Accessory “F”)Unit numberP368010-20P368010-21P368010-226.1N16M 5Size M125110110Size N150195275M6 x 163(SX type: 39)L1=101(SX type: 77)M6 x 1L2=31(MX type: 55)39(MX type: 63)Actuator main shaftCable gland (for -X14)Cable glandDescriptionPart numberCable gland 07-9534-1M2BSuited cable outer diameterø6 to ø12Actuator main shaftSide mounting with the forklever assembly MXSide mounting with the forklever assembly SXM20 x 1.5Exploded View(3) Cover sealP O S I T I O N E RELECTORO PNEUMATIC IP8000Body cover unit(1) Pilot valve unitCompensation springZero adjusting unitFeedback springMini-terminal unit (No terminal box)Span adjusting unitSPANTorque motor unitFeedback shaft assemblyTerminal joint unit(No terminal box)MPaFeedbacklever unitSMCMPaSUP(2) Base sealBody unitReplacement Parts (Ambient temperature: Standard)No.123DescriptionPilot valve unitBase sealCover sealPart no.P565010-7P56501012-3P56501013NoteIP8000/810057