ATEX compliant - SMC ETech

ATEX Compliant Reed Switch/Direct MountingD-Z73/D-Z80-588GrommetNote) All other specifications(dimensions, drawings, etc.)are the same as the non ATEX type.SpecificationsD-Z7 (With indicator light)Auto swich model numberATEX CategoryApplicationLoad voltageMax. load current and load current rangeContact protection circuitInternal voltage dropIndicator lightD-Z8 (Without indicator light)Auto switch model numberATEX CategoryPLC: Programmable Logic ControllerD-Z73II 3GD EEx nA II T5 X -10°C≤Ta≤+60°C IP67Relay/PLC24V DC5 to 40mANone≤ 2.4V (up to 20mA)/≤ 3V (up to 30mA)ON: When red light emitting diodeD-Z80II 3GD EEx nA II T5 X -10°C≤Ta≤+60°C IP67ApplicationRelay/PLC/IC circuitLoad voltageACAC24VDCor less48VDCor lessMax. load current50mA40mAContact protection circuitInternal resistanceNone1Ω or less (Including 3m lead wire)Lead wire Oilproof vinyl heavy insulation cable, ø3.4, 0.2mm 2 , 3 cores (Brown, Black, Blue), 2 cores (Brown, Blue), 0.5mThis category 3 type autoswitch can only be used in zones 2 and 22.Internal Circuit( ): If not applicable for IEC StandardD-Z73Reed switchD-Z80LED Brown(Red)ContactResistanceprotectionboxZener diodeCD-P11CD-P12Blue(Black)OUT(+)Brown(Red)toOUT(–)Blue(Black)How to order7380D-ZSwitch No.With indicator lampWithout indicator lampLead wire lengthNo numberLZ-588Suffix forATEX certified CAT.30.5m3m5mReed switchContactprotectionboxCD-P11CD-P12OUT(±)Brown(Red)toOUT( )Blue(Black)±Note) qIn the case operation load is an inductive load.wIn the case the wiring length to “>” 5m.Be sure to use the auto switch with the contact protectionbox in any case mentioned above.48