ATEX compliant - SMC ETech

ATEX Compliant Vane Type: Rotary ActuatorSeries 56-CRB1Sizes: 50, 63, 80, 100How to OrderATEX category 356-CDRB1 B W 8090STable 1: Foot assembly part no.ModelCRB1LW 50CRB1LW 63CRB1LW 80CRB1LW100With auto switch unit-DWWithout switch unitWith switch unitUnit part no.P411020-5P411030-5P411040-5P411050-5MountingB Basic typeL∗ Foot typeRefer to Table 1 belowif only foot assembly isrequired separately.∗ Foot accesory is shippedtogether with the actuatorbut not mounted on it.StandardOptionalSDSize506380100Shaft typeDouble shaft (long shaft key & four chamfers)RotationClassification Symbol Single vane Double vane90 90° 90°180 180° —270 270° —100 100° 100°190 190° —280 280° —Vane typeSingle vaneDouble vaneThread PortRc(PT)XF G(PF)XN NPTConnecting port position-EA portSide portsAxial portsSide portsB portB portBoltA portAxial portsBody end of the short-shaft sideFor 56-CDRB1When using an Auto switch, select the appropriate switch from the following table and order it separately.Applicable auto switch specificationsAuto switch only conforms to Category 3. (II 3GD EEx nA II T5x -10°C ≤ Ta ≤ +60°C IP67)For detailed specifications on the D-R73, R80, and S7P, please refer to the relevant pages in Best Pneumatics.(Note: Reed auto switches for AC 100V and DC 100V are not within the specification.)TypeReedauto switchSolid stateauto switchModel No.D-R73-588D-R80-588D-S7P-588Electrical entryGrommet(In-line)Grommet(In-line)IndicatorYesNoYesWiring(Output)2-wiring3-wiring(PNP)24V24VDCLoad voltageAC5V,12V 24V or less5V,12V0.5(—)Lead wire ∗ (m)3(L)5(Z)IC circuitIC circuitApplicableloadRelayPLC• Lead wire length 0.5m --- Nil (e.g.) D-R73-5883 m --- L (e.g.) D-R73L-5885 m --- Z (e.g.) D-R73Z-588Note) Refer to the table below for the ATEX temperature class of a rotary actuator (56-CDRB1) with an autoswitch mounted to it.Normal temperature range (5°C to 40°C)Special temperature range (40°C to 60°C)Rotary ActuatorT6T4Auto switchT5T5Rotary actuator with auto switchEquivalent to T5Equivalent to T432