salisbury

SALISBURY LINEMEN’S GLOVESHigh Voltage - ASTM Class 1, 2, 3, 4Class 1 through 4 gloves are available inthe industry standard color black, or incontrasting two-color combinations.The contrast between the thin outercolor against the inner color makesinspecting for cuts and tears easierwhen the glove is inflated or stretched.Class 1 through 4 gloves are available in14, 16 and 18 inch lengths. A straightcuff is standard on 14” (356 mm), 16”(406 mm) & 18” (457 mm) gloves.The straight cuff is the default.A contour cuff is angled to preventbunching or binding at the elbow whenthe arm is bent. The straight cuff is thedefault style.The bell cuff and flare cuff, accommodateheavier winter clothing andallow for greater air flow in warmerweather. These are available for Class 1through 4 gloves. Bell cuff gloves arenot available in sizes 8 or 8H, flare cuffgloves are not available in size 8.Straight CuffE316YB10Contour CuffE218CYB10Bell CuffE216BCYB9HFlare CuffE214FCRB9Cat. No. Breakdown for Class 1,2,3,4 GlovesClass Glove Length Cuff Style Color Sizein.E 1* 14, 16 or 18 FC, BC, C B, YB or RB 8, 8HE 2* 14, 16 or 18 FC, BC, C B, YB or RB 9,9HE 3* 14, 16 or 18 FC, BC, C B, YB or RB 10, 10HE 4* / ** 14, 16 or 18 FC, BC, C B, YB or RB 11, 11HFC=flare cuff BC=bell cuff C=contour cuff 12*Straight cuff is the standard.B=black YB=Y inside, B out RB=R inside, B out:Type I Natural RubberExample: E116FCYB10** Class 4 gloves come in full and half sizes 9-12 only.S ALISBURYSetting industry standards since 1855. 7520 N Long Ave Skokie Il 60077 Toll Free 877.406.4501 Fax 847.679.2401E-7