salisbury

SPECIALTY CLAMPSCutout Clamps are applied with a clampstick into the bottomhinge contact of a cutout. This clamp can be used as part of aground jumper or by using a contact stud using a standardgrounding jumper with “C” clamps from the stud to ground.Lightweight, heavy duty Stringing Ground installs anywherealong the length of conductor to provide a continuousgrounding bond, even if the conductor is slack. Constructedof high-strength aluminum alloy with largediameter sheaves and bronze bushing bearings. Sideopening for quick, easy installation. Adjustable compressionspring assures proper contact for differentsizes of conductor and for easy passage of splices. Intests, this clamp withstood a 25kA, 28 cycle short circuit.The three options for a ground tap connection are: terminationfor ground cables, contact/hanger stud and connectorfor ground wire.21554310Cutout Clamp withContact StudThe Cable Penetrating Ground Clamp is designed to be usedeither as a tool for “spiking” jacketed cable or as a part of agrounding jumper used to bond both ends of an opened cable. The7/8” long plated steel point is inserted into the eye screw making alow resistant one piece spear. If one point becomes blunted it maybe sharpened or replaced with a new spear. Clamps are aluminumbody with either smooth or serrated upper jaws. The hardaluminum serrated insert makes optimum contact with thestranded neutral shield.2607Cutout ClampJumper AssemblyB R O N Z ECat. No. & Description ASTM Main Line Continuous Weight ea.Grade Range Current Rating lbs. ( kgs)BRONZE CUTOUT CLAMPS - “V” Thread4310 Eye 5/8 - 11 UNC 2.1 ( 1.1 )w/ ferrule connection Max. Cable Size: 4704373 Eye 400 RMS Amps 3.3 ( 1.5 )w/ contact stud 5 Type VI4379 Contact stud only Threaded Stud 60 Hz 1.2 ( .5 )Compression FerruleA L U M I N U MSTRINGING GROUND2155 Stringing ground Alloy Rollers 1033.5 KCM ACSR- 300 RMS Amps 5.3 ( 2.4 )Smooth Contacts to #2 Sol 60 HZClass A 1.26”-.25”32mm - 7mm DiaSplice: 1.5” ( 38mm ) diaCABLE PENETRATING GROUND CLAMP - Acme Thread - Pointed Lower Jaw2607 1.25” Opening Class B - - 1.7 ( .8 )20867 2.40” Opening serrated jaw 2.2 ( 1 )2618 1.50” Opening Class A - - 1.6 ( .7 )4290 2.40” Opening smooth jaw 2.1 ( 1 )S ALISBURYSetting industry standards since 1855. 7520 N Long Ave Skokie Il 60077 Toll Free 877.406.4501 Fax 847.679.2401H-11