salisbury

NON-LOCKING FRP INSULATED JUMPER CLAMPSFRP Jumper Clamps are designed for maximumloads, voltages, and cables. During atemperature rise test at 25% overload, theseclamps heated 35% less than 4/0 cu. cable.Blunted points on the handle provide optimumgrip, resist impact, and will not soften withoverloads. The body and jaw are made from acopper based alloy. The lower jaw is made ofself lubricating bronze. The assembled jumpersare sold with a 10ft. (3m) or 12 ft. (3.7m) cableand unshrouded ferrules.1610Cat. No. Main Line Max Amps Rating OAL Length Weight ea.Range Continuous in. ( mm ) lbs. ( kgs )1610 954 MCM (1.25”-.162”) 400 36 kV Ø-Ø 11 ( 279 ) 6.4 ( 2.9 )21 kV Ø-GRDAssembled Jumper Sets ( Unshrouded Ferrules)Jumper Cable Length Cable Size Cable Ferrule Max Amps Weight ea.Cat. No. Cat. No. Cat. No. Continuous lbs. ( kgs )1610 Clamp2772 10’ 2/0-15kV 2756 2024 300 5.8 ( 2.9 )2773 10’ 4/0-15kV 2757 2025 400 20.3 ( 9.2 )2450 10’ 1/0-15kV 2755 2023 250 15 ( 6.8 )2066 12’ 1/0-35kV 2059 2023 250 20.3 ( 9.2 )20876 12’ 2/0-35kV 4370 2024 300 21.5 ( 9.8 )S ALISBURYSetting industry standards since 1855. 7520 N Long Ave Skokie Il 60077 Toll Free 877.406.4501 Fax 847.679.2401G-7