salisbury

PRESSURE TERMINAL TYPE CLAMPSThese Duckbill and “C” Type Clamps featurepressure terminations for use with plain type ferrules.Made of high strength aluminum, with bronzeeye-screws, these Grade 5 clamps are designed forsmooth operation and long service life. Duckbillclamps for all grounding applications from .16 to1.1" diameter. “C” Type clamps for all groundingapplications from .06 to 1.25" diameter.24404NEWFlat Jaw Grounding Clamps are now availablewith pressure terminals for use with plain type cableferrules. These clamps are made of a high strengthaluminum, and a bronze eye screw or “T” handle fordurability and smooth operation. Also featured is ahardened aluminum alloy serrated insert. This insertis designed to grip tightly to flat surfaces and cutthrough surface contamination and oxidation for lowresistance contact. The pressure termination isdesigned on an angle keeping the cable out of theway during installation. The cable termination isangled to minimize interface with the “T” handle oreye when installing or removing the clamp.244662440524407 - Stick MountedDuck Bill ClampSalisbury’s 24438 Plain Ferrule 4-way Connectoris available on page H-23.24406Cat. No. & Description ASTM Main Line Continuous Weight ea.Grade / Class Range Current Rating lbs. ( kgs )A L U M I N U M1.1” SMOOTH JAW ALUMINUM --Spring Loaded - “V” Thread24404 Duckbill 795 KCM ACSR 1.5 ( .68 )Eye w/o strain relief sleeve 5 / A to #6 400 RMS AmpsSmooth Jaw 1.1” - .16” 60 Hz28mm - 4mm Dia. 4.5 / 224466 “C” Type 1035.5 KCM ACSR 2.2 ( 1.0 )Eye w/o strain relief sleeve 5 / A to #6 400 RMS AmpsSmooth Jaw 1.26” - .06” 60 Hz32mm - 4mm Dia. 4.5 / 224407 Stick mounted duckbill clamp 4.5 ( 2.05 )21754 Hanger Stud only .3 ( .1 )GRADE 5 ALUMINUM FLAT JAW Grounding Clamp - Acme Thread24405 “T” screw 1.5” - .06” 2.1 ( .9 )no strain relief sleeve 5 / B Flat or Square 400 RMS Amps24406 Eye screw Serrated Jaw 1.26” - .06” 60Hz 2.0 ( .9 )no strain relief sleeve32 - 1.5 mm Dia.H-12SALISBURY Grounding Equipment. www.whsalisbury.com