IM 01F06A00-01EN 14th Edition - Yokogawa

5. PARAMETER SETUP(9) Item K : MaintenanceThese items are for maintenance.Item Name R / W Data Range UnitDecimalPointRemarkK00K10K20MAINTENANCETLASIGNAL LEVELWW0.1 to 20.00.1 to 20.011Menu K (Maintenance)Trigger Level AdjustSignal LevelK25 N.B. MODE W AUTO (0)Selection of Noise balance ModeMANUAL (1)TUNING AT ZERO (2)K26K28K30K32K34K36NOISE RATIOSET VORTEX FVELOCITYSPAN VVORTEX FREQ.SPAN FR / WWRRRR0.00 to 2.000 to 10000Hzm/sm/sHzHz20 to 5220 to 50 to 5Output test by setting simulated frequency.(*2)VelocitySpan velocityVortex frequencySpan frequency(Indicate only for F10: “Saturated Steam” or “Super heat steam” or “Liquid mass)(*1)K38K40DENSITYERROR RECORDRR0.00001 to 32000 D25 0 to 5 Density value (Calculated by Thermometer)Error RecordsK45 H VIBRATION W 0%NO ACTION(0)(1)Selection of Output Function when “HighVibration” error is indicated.K50 SOFTWARE REV R 0.01 to 99.99Software Revision NumberK60 SELF CHECK R GOODERRORSelf-diagnostic message(*1) Only for Option Code /MV(*2) Available for 5.10 or greater version that can be checked in K50 SOFTWARE REV.Initialvalue1.01.0(0)(1)Disp. U / DDDDDDDDDDDT050310.EPS(10) Item M : MemoThese items are for Memorandum.Item Name R / W Data Range UnitDecimalPointRemarkM00M10M20M30M60MEMOMEMO 1MEMO 2MEMO 3SELF CHECKWWWR16 characters16 characters16 charactersGOODERRORWWWRMenu M (Memo)Memorandum 1 (16 characters) (*3)Memorandum 2 (16 characters) (*3)Memorandum 3 (16 characters) (*3)Self-diagnostic message(*3) The character and sign which can be set up are the same as C10.InitialvalueDisp. U / DT050311.EPS5-8 IM 01F06A00-01EN