Docu Cutter DC-545 HC/DC-545 HCEX

Operating Instraction - DC545 HCPart Names and Their FunctionsTroubleshooting tableSymptom Possible Cause RemedyThe machinedoes not feedpaper.The machinedouble feedspaper.The paper is cutat an angle ornot fed straight.Paper level is too low.Paper separators are too high.Not enough airflow.Paper level is too high.Paper separators are too low.Too much airflow.The paper is skewed.Raise the elevator height by pushing the level adjustmentlever downward. (See Figure 1-1)Lower the paper separators by turning the separator adjustmentknob clockwise, towards a lower number. (See Figure 2-1)Increase the airflow by turning the airflow adjustment knobcounter-clockwise. (See Figure 3-1)Lower the elevator height by pushing the level adjustmentlever upward. (See Figure 1-1)Raise the paper separators by turning the separator adjustmentknob counter-clockwise, towards a higher number. (See Figure2-1)Decrease the airflow by turning the airflow adjustment knobclockwise, towards a lower number. (See Figure 3-1)1. Remove the paper from the feed tray.2. Turn the skew adjustment knob according to the instructionson the label to adjust the angle of the feed guide.123SpecificationsNo. Item AF-1001 Model Floor Model2 Model No. AF-1003 Input paper size Min.8.5” x 11” / A4Max.12.6” x 18” / A34 Input paper weight Min.110gsm (29.3LB)Max.230gsm (85LB)5 Media type Range: Regular copy paper to coated heavy weight paper6 Feeding method Automatic (Air suction method)7 Feed tray capacity 3.9” (100mm)8 Power supply DC5V, DC24V is supplied from DC-545 main body9 Machine dimensions 43.4” (W) x 22.7” (D) x 37.8” (H)1102mm (W) x 576mm (D) x 960mm (H)10 Machine weight 117.1LB (Feeder : 44.9LB, Stand : 72.2LB)53.2kg (Feeder : 20.4kg, Stand : 32.8kg)11 Operating temperature 41-86F (5-30°C)12 Operating Humidity 40-70% (no condensation within this range)17