Docu Cutter DC-545 HC/DC-545 HCEX

More documents

Recommendations

Info

Operating Instructions - DC545 HCEXAbout the Waste TrayPieces of cut paper accumulate in the waste tray. Open the drawer located at the bottom left of the machine andremove them periodically. Accumulation of pieces of paper may cause paper jams.How to remove the accumulated pieces of paper is described below.WARNING• Be sure to confirm that the machine is in a full stop before removing the accumulatedpaper to prevent your hands or fingers from being caught or pinched in the machine.• Pieces of cut paper accumulate in the waste tray. Open the drawer located at the bottom ofthe machine and remove them periodically. Accumulation of pieces of paper maycause paper jams.1○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○Confirm that the machine is fully stopped.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○Open the waste tray located at the bottom leftof the machine and remove the accumulatedpaper.23Tip• When pieces of paper remain in the machine,open the waste tray cover located at the front ofthe machine and remove them.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○29
Chapter 4Troubleshooting - DC545 HCEXThis chapter describes what to do when an error has occurred and how to deal with paper jams and errormessages.Troubleshooting Flow ChartPower Does Not Turn ONIf the power does not turn ON, check the following.THE MACHINE DOESN'T TURN ON.IS POWER PLUG INSERTED?YESNOIS POWER SWITCH ON?Insert the powerplug securely.YESNOTurn the power switch ON.Please contact your service person.30
Page 6 and 7: ○ ○ ○ ○ ○ ○ ○ ○ ○
Page 8 and 9: ○ ○ ○ ○ ○ ○ ○ ○ ○
Page 10 and 11: ○ ○ ○ ○ ○ ○ ○ ○ ○
Page 12 and 13: ○ ○ ○ ○ ○ ○ ○ ○ ○
Page 14: Operating Instraction - DC545 HCPar
Page 17 and 18: Part Names and Their Functions○
Page 19 and 20: Chapter 2Before Using This Machine
Page 21 and 22: How to set up the System○ ○ ○
Page 23: Part Names and Their Functionsi!0oN
Page 26 and 27: Before Using This Machine - DC545 H
Page 28 and 29: Operating Instructions - DC545 HCEX
Page 32 and 33: Troubleshooting - DC545 HCEXTrouble
Page 34 and 35: Troubleshooting - DC545 HCEXError M
Page 40 and 41: Troubleshooting - DC545 HCEXWhen a
Page 54 and 55: Manual Programming - DC545 HCEXChap
Page 56 and 57: Manual Programming - DC545 HCEXDefi
Page 58 and 59: Manual Programming - DC545 HCEXDefi
Page 60: Manual Programming - DC545 HCEXDefi
Page 63 and 64: Factory Preset JobsPROGRAMNUMBER #9
Page 65 and 66: Factory Preset JobsEuropePROGRAMNUM
Page 67 and 68: How to Manually Program a Job○
Page 73 and 74: Appendix - DC545 HC/DC545 HCEXThis
Page 75 and 76: SpecificationsSpecifications of Reg
Page 77 and 78: SpecificationsThe second program en
Page 79 and 80: SpecificationsSelect OptionsDelete
Page 81 and 82:
SpecificationsPOSITIONING THE BAR C
Page 83 and 84:
Specifications2. Non-Printing AreaR
Page 85 and 86:
SpecificationsHow to do AUTO CUTWha
Page 87 and 88:
MEMO
Page 89 and 90:
MEMO
show all

Docu Cutter DC-545 HC/DC-545 HCEX

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?