Prisma Plus LV Switchboards - POWERLAB

DistributionSystem G630 A Powerclip busbarsDD381380Catalogue numbers160/630 A Powerclip busbars Available in two lengths (1000 and 1400 mm) in three and four-pole versions. Thebusbars can be cut to length every 200 mm.Prefabricated connections are available for the devices.Powerclip busbars 160 A 250 A 400 A 630 AThree-pole L = 1000 mm 04111 04112 04113 04114L = 1400 mm 04116 04117 04118 04119Four-pole L = 1000 mm 04121 04122 04123 04124L = 1400 mm 04126 04127 04128 04129Connection between incoming device and Powerclip busbars Cat. no.Power supply block (with connection) NS250 04060NS400 04070NS630 04071Universal power supply block100/250 A 04061(without connection)400/630 A 04074Connection for universal power supply block Vertical NS100/250 04062Vertical NS100/250 in duct 04064Vertical NS400/630 in duct 04073DD381381DD381382DD381405NS400 power supply block (04070) betweenincoming device and busbars.NS250 power supply block (04060) betweenbusbars and Compact NS250.250 A universal power supply block (04061) +250 A connection (04062) between incomingdevice and busbars.Connection between 200 A Multiclip and Powerclip busbars Cat. no.200 A 4P connection for Multiclip (supplied with mounting hardware) 0402135 mm² additional blocks Cat. no.35 mm² additional blocks 3P 041554P 04156Busbar connection4 160 A connections, L = 230 mm(for NSA160)35 mm² 4P additional blocks (04156). A 45 mm² ferrule for connection to tunnel terminals is crimped to one end.A 45° ring lug is crimped to the other end.Cat. no.04146DD381384DD381385AccessoriesPowerclip tap-off blocksEach block can be used to connect:b one 6 mm² and one 10 mm² cable (04151)b one 16 mm² cables (04152).Equipped with spring terminals.Designation12 Powerclip tap-off blocks with 6 mm² + 10 mm² terminals 0415112 Powerclip tap-off blocks with 16 mm² terminals 04152Connection coverClip-on covers that block off the connected cable lugs and can be cutas needed.Cat. no.They maintain IPxxB with 90° angle lugs and/or cable sizes from 10 to 25 mm².DesignationCat. no.8 IPxxB covers for Powerclip busbars 041508.8 class mounting hardwareUsed for electrical connections to the copper bars.DesignationCat. no.Set of 20 CHC M6 x 12 mm screws for Powerclip busbars 0415899