Prisma Plus LV Switchboards - POWERLAB

EnclosuresSystem GAir-conditioning accessoriesCatalogue numbersDD381676Ventilated front plateDesignationCat. no.IP30 ventilated front plate, H = 50 mm (1 module), S = 80 cm² 03891IP30 ventilated front plate, H = 150 mm (3 modules), S = 250 cm² 03895Located at the top and bottom of the switchboard, IP30 ventilated front platesfacilitate natural convection in the switchboard.S is the surface area of the openings.DD381666Heating elementsL N1N2LNDesignation H W D (mm) Cat. no.55 W heating resistor 184 70 60 0899290 W heating resistor 184 70 60 08993250 W heating resistor 180 80 80 08994The resistors can be mounted horizontally or vertically. They prevent condensation,corrosion and superficial leakage currents.They maintain a positive temperature in the enclosures when external temperaturesdrop very low.Characteristicsb aluminium case with finsb turns off at 60°C, turns on at 25-30°C (temperature of the resistor itself)b equipped with a symmetrical rail for rapid mounting (clips on).DD381667DD381573DD38157408994. 08992, 08993.DD381668ThermostatDesignationCat. no.Thermostat 08998Used to control the temperature inside electrical switchboards in conjunction withheating resistors and fans.Setting range: +5°C to +60°C.Input voltage: 230 V.Fixing: clips onto a modular rail.DD381575131