Prisma Plus LV Switchboards - POWERLAB

EnclosuresSystem GIP30/IP31/IP43 floor-standingenclosuresCatalogue numbersDD380631Floor-standing enclosure (IP30)DD380634DD380635DD380636DD380637DD381354Basic floor-standing enclosure.No. of verticalmodulesHeight ofenclosureBasicenclosureEnclosureextensionPlain doorTransparentdoorFloor-standing enclosure (IP30)27 1530 08202 08212 08222 0823230 1680 08203 08213 08223 0823333 1830 08204 08214 08224 08234b two basic floor-standing enclosures cannot be combinedb to create a switchboard comprising a number of enclosures, use a basic floorstandingenclosure and one or more floor-standing enclosure extensionsb floor-standing enclosure extensions are supplied with a combination kit for thebasic floor-standing enclosure.b reversible doors (opening to left or right), equipped with a handle and keylock(key 405). For other possibilities, see page 82.Floor-standing enclosure extension.DD380632Duct, W = 300 mm (IP30)DD380638DD380639DD380640No. of verticalmodulesHeight of ductDuct,W = 300 mmPlain doorTransparentdoorDuct, W = 300 mm (IP30)27 1530 08272 08282 0829230 1680 08273 08283 0829333 1830 08274 08284 08294b the duct is supplied with a combination kit for the basic enclosureb reversible doors (opening to left or right), equipped with a handle and keylock(key 405). For other possibilities, see page 82.DD381258Duct front plate, see page 68.DD381257Canopy (IP31)The addition of a canopy over the floor-standing enclosure (and the duct) equippedwith a door ensures compliance with the degree of protection IP31 (see page 78).Gasket (IP43)When the floor-standing enclosure (and the duct) is equipped with a canopy, agasket for the door of the floor-standing enclosure (and the duct) ensures compliancewith the degree of protection IP43 (see page 78).76