Prisma Plus LV Switchboards - POWERLAB

EnclosuresSystem GIP55 enclosuresFunctional mounting platesCatalogue numbersMounting plates for 22 mmdiameter devices or industrialsocketsPlastic mounting plates are used for 22 mm diameter devices or industrial socketson the outside of the switchboard.They can be installed:b horizontally on the partial doors with cut-outsb vertically on the side panels with cut-outs■ horizontally vertically at any point on a door or side panel.DD381441Plain mounting plateA plain plate is used to blank off partial doors or side panels with cut-outs.DesignationCat. no.Plain mounting plate, 210x150 mm 08861Can be used to mount any type of device (EPO devices, measurement devices,sockets).DD381442Mounting plate for 22 mm diameter devicesFor installation of eight 22 mm diameter devices (lights, switches, pushbuttons, etc.).DesignationCat. no.Mounting plate with eight 22 mm diameter holes 08862Supplied with 4 blanking plugDD381438DD381443Mounting plate for Schneider industrial socketsMounting plate with two 65 x 85 mm holes.Intended for the installation of:b 10/16 A residential socketsb inclined 16 A IP44 and IP67 sockets.DesignationCat. no.Mounting plate with two 65 x 85 mm holes 08863Supplied with a 65 x 85 mm blanking plate.DD381444Mounting plate with two holes, 65 x 85 mm and 90 x 100 mmIntended for the installation of:b inclined 16 and 32 A IP44 and IP67 sockets in the 90 x 100 mm hole (1)b residential sockets (< 10/16 A) in the 65 x 85 mm hole (1a)b inclined 16 A IP44 and IP67 sockets in the 65 x 85 mm hole (1b).DesignationCat. no.Mounting plate with two holes, 65 x 85 mm and 90 x 100 mm 08864Supplied with a 65 x 85 mm blanking plate.89