Prisma Plus LV Switchboards - POWERLAB

EnclosuresSystem GIP55 enclosuresPartial doorsSide panels with cut-outsCatalogue numbersPartial doorsWhether plain or with cut-outs, they can be mounted on basic enclosures orextensions at least eleven modules high (H = 650 mm).They are equipped with:b hinges that open 170°b a 8 mm male triangle insert (key not supplied).The front can be completed with a standard door, either plain or transparent.Each basic enclosure or extension can be equipped with only one partial door.DD381437Partial plain doorDesignationCat. no.Partial plain door4 modules (H = 200 mm) for enclosures from 11 to 27 modules high 083746 modules (H = 300 mm) for enclosures 33 modules high 08375DD381438Partial door with cut-outsDesigned for two mounting plates with 22 mm diameter devices or Schneiderindustrial sockets.DesignationCat. no.Partial door with cut-outs4 modules (H = 200 mm) for enclosures from 11 to 27 modules high 083766 modules (H = 300 mm) for enclosures 33 modules high 08377They are supplied with an insulating plain mounting plate that can be used to blankoff a reserve hole or to install all types of devices (sockets, EPO devices,measurement devices).The dimensions of the two holes are 200 mm x 112 mm.DD381439Tego Dial partial doorDesigned for "Tego Dial" mounting plates (H = 100 mm) on which it is possible tomount control, monitoring, measurement and indication devices.DesignationCat. no.Tego Dial partial door4 modules (H = 200 mm) for enclosures from 11 to 27 modules high 083786 modules (H = 300 mm) for enclosures 33 modules high 08379The cut-out is 375 mm wide (five 75 mm modules).For selection of Tego Dial mounting plates, see the Schneider industrial controlcatalogue.DD381440Side panel with cut-outSide panel with two cut-outs (only one for 7 and 11-module panels) for mountingplates intended for 22 mm diameter devices and those for industrial sockets.These panels simply replace a standard side panel.Can be mounted on the left or right-hand side.Supplied with one blanking plate (except for the 7 and 11-module panels).DesignationCat. no.1 side panel with cut-out7 mod. 0836211 mod. 0836315 mod. 0836419 mod. 0836523 mod. 0836627 mod. 0836733 mod. 0836988