Prisma Plus LV Switchboards - POWERLAB

PD390542Functional unitsSystem GCatalogue numbersPresentationModular devicesNG125 circuit breakersNSA125/160 circuit breakersINS40/160 switch-disconnectorsGeneralA rigid modular railMade using an aluminium alloy, the rail design is extremely rigid. The rail supportsare crimp mounted.Fast mountingThe pre-mounted rail supports have positioning studs to guide the rail at the rear ofthe enclosure.Only two mounting screws are required.Multiple functionsA number of devices clip directly onto the rear of the rails, including 80 A and 200 AMulticlip distribution blocks, all horizontal cable-running accessories such as cablestraps and trunking supports, as well as the supports for earth bars.Supply from all directionsSupply to the rows, using comb busbars or Multiclip distribution blocks, can be via:b a Polybloc distribution block installed on the incoming deviceb Powerclip insulated busbars installed behind the devicesb multi-stage busbars installed in a lateral ductb flat busbars installed at the rear of the enclosure.PD390543Distribution using Powerclip busbars:see page 99.Distribution using Distribloc in a Pack wall-mount enclosure:see page 108.Distribution blocksMulticlip distribution blocksFast and secure front connection using spring terminals.Particularly reliable connections, will not loosen over time, insensitive to vibrationsand thermal variations.All types of modular devices can be mixed.Easy balancing of phases.Interchangeable devices.Easy installation upgrades.Fully insulated.Comb busbarsDirect connection to device terminals or via a connector.Fully insulated.Can be cut to length.Cable runningCable strapsEasy and fast to install.Low cost.TrunkingPerfectly integrated cable running.Attractive.44