Prisma Plus LV Switchboards - POWERLAB

EnclosuresSystem GIP55 enclosuresInstallation accessoriesCatalogue numbersDD381450Mounting on a poleThe kit is used to mount an enclosure or an enclosure + duct combination, withoutdrilling, to an I-beam or concrete pole that can be rectangular or cylindrical.The maximum circumference of the pole is 580 mm.DesignationCat. no.Pole-mount kit for enclosures 08395The kit is made up of:b two reinforcement cross-members to support the enclosureb mounting components and hardware.DD381451CanopiesInstalled on the mounting uprights or directly on the wall, canopies improveswitchboard protection against vertically falling water and objects.Colour RAL7016.DesignationCat. no.Canopy, W = 600 (for enclosure) 08386Canopy, W = 300 (for duct) 08387Supplied with:b the hardware required for mounting on the uprightsb the components required for combination with another canopy.DD381452Membrane-type gland plates(IP55)These gland plates are made of an insulating material and simply replace thestandard steel gland plates supplied with the enclosure (two plates) or the duct (oneplate).Different size cables can enter the switchboard through the bottom without usingcable glands while maintaining the degree of protection IP55.DesignationCat. no.Gland plate with 39 entries 08898for three 14 to 26 mm diameter cables +four 10 to 20 mm diameter cables +thirty-two 7 to 16 mm diameter cablesGland plate with 2 entries 08899fortwo 33 to 72 mm diameter cablesDD381453DD381455DD381454Lifting ringsThe lifting rings are secured directly to the switchboard or to the mounting uprights.Supplied with mounting hardware.DesignationCat. no.Set of two lifting rings 0839691