Prisma Plus LV Switchboards - POWERLAB

EnclosuresSystem GIP30/IP31/IP43 enclosuresInstallation accessoriesCatalogue numbersDD381359Lifting accessoriesLifting ringsThe lifting rings are used to move a single wall-mount or floor-standing enclosure.For combined enclosures, use the lifting/reinforcement cross-members (see below).Cat. no. selectionDesignationCat. no.Set of two lifting rings for single wall-mount or floor-standing enclosures 08801DD381360Lifting/reinforcement cross-membersThe lifting cross-members, already installed to reinforce combined enclosures, haveholes for lifting.Cat. no. selectionDesignationCat. no.Set of two lifting/reinforcement cross-membersfor wall-mount or floor-standing enclosure alone 08810for two wall-mount or two floor-standing enclosures 08811for a wall-mount or floor-standing enclosure + 300 mm wide duct 08812for two wall-mount or floor-standing enclosures + 300 mm wide duct 08813DD381636DD381653Trunking spreaderFor a professional-looking connection between the trunking and the enclosure.Can be installed at the top or bottom.The spreader is marked for cut-outs for standard trunking sizes.The maximum capacity is two 250 x 80 mm trunking sections.DesignationCat. no.Trunking spreader 0882480