Prisma Plus LV Switchboards - POWERLAB

EnclosuresSystem GIP55 enclosuresInstallation accessoriesCatalogue numbersDD381446Mounting supportsMounting uprightsThe uprights are used to mount on a wall one or more enclosures combinedhorizontally or vertically.The uprights leave space behind the switchboard for cable running and to improveventilation.Colour RAL7016.For one enclosure, order two uprights.For each enclosure extension or duct, order one additional upright.DesignationCat. no.1 mounting upright (L = 1950 mm) 08391Supplied with:b two adjustable fixing bracketsb one joint for combination with a plinth or another upright.Note: To create the configuration opposite, order:three mounting uprights (08391 x 3).DD381447Plinth, H = 150 mmThe plinth, installed in the factory or on-site, raises the switchboard to protect it andfacilitate spreading of cables arriving from a trough.Colour RAL7016.The wall-fixing brackets supplied with the plinth ensure that the switchboard cannottopple over.For the basic enclosure, order two gussets and one 600 mm wide plinth cover panel.For each enclosure extension or duct, order one additional gusset and thecorresponding cover panel.DesignationCat. no.Plinth gusset 08392Plinth cover panel, W = 600 mm (for enclosure) 08393Plinth cover panel, W = 300 mm (for duct) 08394Note: To create the configuration opposite, order:three plinth gussets (08392 x 3)one plinth cover panel, W = 600 mm (08393)one plinth cover panel, W = 300 mm (08394).DD381448Wall structureThe switchboard can be mounted on the structure in the factory or on site.Two wall-fixing brackets supplied with the basic enclosure ensure that theswitchboard cannot topple over.Colour RAL7016.DesignationCat. no.1 mounting upright (L = 1950 mm) 083911 plinth gusset 08392Plinth cover panel, W = 600 mm (for enclosure) 08393Plinth cover panel, W = 300 mm (for duct) 08394Nota : To create the configuration opposite, order:three mounting uprights (08391 x 3)three plinth gussets (08392 x 3)one plinth cover panel, W = 600 mm (08393)one plinth cover panel, W = 300 mm (08394).DD381449Free-standing structureThe free-standing structure is simply two wall structures combined back-to-back.The switchboard can be positioned anywhere.It can be fixed to the floor and moved easily using the lifting rings (08396).It can be equipped with one or more enclosures with Schneider sockets.Colour RAL7016.DesignationCat. no.1 mounting upright (L = 1950 mm) 083911 plinth gusset 08392Plinth cover panel, W = 600mm (for enclosure) 08393Plinth cover panel, W = 300 mm (for duct) 08394Note: To create the configuration opposite, order:four mounting uprights (08391 x 4)four plinth gussets (08392 x 4)two plinth cover panels, W = 600 mm (08393 x 2).90