Prisma Plus LV Switchboards - POWERLAB

StandardsPrisma Plus tested switchboardsSystem GCharacteristicsA switchboard must comply with the requirements in standard IEC 60439-1 toguarantee the safety and reliability of the installation.Managers of installations, fully aware of the professional and legal liabilities weighingon their company and on themselves, demand a high level of safety for the electricalinstallation.What is more, the serious economic consequences of prolonged halts in productionmean that the electrical switchboard must provide excellent continuity of service,whatever the operating conditions.The Schneider Electric solution b specify switchboards that comply with standard IEC 60439-1b guarantee a level of safety that has been 100% tested, from the day theswitchboard is installed and throughout its service lifeb ensure the return on investment through easy upgrading of the installation incompliance with the standardb guarantee that the switchboard complies with the technical specifications.Prisma Plus tested switchboardsThe conformity of the switchboard has been tested and proven.A Prisma Plus switchboard is:b made up of Merlin Gerin low-voltage devices and components that all comply withthe applicable standardsb based on configurations in the Merlin Gerin catalogueb made up of Prisma Plus mechanical and electrical components that have beensubjected to the seven type tests required by the standardb mounted and wired by a panel builder in compliance with professional standardsb subjected to the three routine tests required by the standard.Schneider Electric makes available to the panel builder everything required to createtested Prisma Plus switchboards, including the basic configurations in the lowvoltagedistribution catalogue, all the documentation for switchboard design andmounting, calculation and design software, etc.The panel builder can easily demonstrate conformity with standard IEC 60439-1 bypresenting the declarations or certificates of conformity concerning the type testscarried out by independent laboratories ( ASEFA, ASTA, KEMA, etc.) and suppliedby Schneider Electric.The panel builder is responsible for the three routine tests and delivers thecorresponding declarations of conformity.150