MPH series video encoders - Teleste

Starting WebUI sessionTo create a WebUI session, first enter the device IP address into theweb browser’s address bar (see section Device’s IP address). Thefollowing LOGIN window appears on the screen. Enter the requiredusername and password (see bottom) in the fields and then clickto continue --> Web user interface’s MAINPAGE appears on the screen.The Web user interface session to MPH series video encoder isnow activated.adminadminLogin window with the default username and password (for administrator).User levels and permissionsThe user management supports three different user levels of which eachhas specific priviledges as shown below. The individual usernames, passwordsand approved user level can be changed via the WebUI and CLI.Page Operation User Operator AdministratorGeneral Access x xSDP download x xMainLog download x xStart/Stop x xRTSP link copy x xGeneral Access - xVideo Encoder Save - xCancel - xGeneral Access - xBackup - xRestore - xRead and writeReboot device - x access to allMaintenance Soft factory reset - x pages and allsettingsHard factory reset - -Software upload - -Software download - -License install - -General Access x xSave x xCancel x xUserChange password x xManagementChange user group - -View/Edit other users - -Add User - -10 MPH100/400 series video encoders WebUI user manual