MPH series video encoders - Teleste

1. Video InterfacesClick “Video Interfaces” under the Interface Configuration menu. VideoInterfaces page appears on the screen. In this page you can see thenumber of physical video inputs available and adjust the brightness,contrast and saturation values for them.Video status. The colour bar reflectthe status of the video. Green colourbar means that there is video signal.Yellow colour bar with text tells thatthere is no video.Screenshot from the current video.Here you see how the media profile isassigned to a video interface.When monitoring an area for security,there may be certain parts within thecamera’s field of view that need to bekept private. Masking is a feature thatenables these areas to be concealedfrom view.Brightness, Contrast and Saturationvalues for the video channel.VIDEO INTERFACES page.User can configure the encoder toautomatically hide certain areas witha mask, which can be adjusted interms of its colour.Mask editor shows a screenshot fromcamera view and overlays atranslucent mask on the image.Draw mode: Masked (highlighted)areas are private areas that areremoved (concealed) fromcamera’s view.Brush size: Select brush sizefor masking.Mask color: Depending on thebrightness of the image snapshot,appropriate mask preview color canbe chosen. This color affects thepreview on mask editor only anddoesn’t reflect on the streaming video.Masked/Highlighted areaMASK EDITOR page contains settings for hiding certain areas from theencoded picture.14 MPH100/400 series video encoders WebUI user manual