MPH series video encoders - Teleste

More documents

Recommendations

Info

3. Video EncodersClick “Video Encoders” under the Media Configuration menu. VideoEncoder Configurations page appears on the screen. Video encodingsettings can be configured on this page, e.g. select format (MJPEG,MPEG-2, MPEG-4 and H.264), set resolution, bit rate, frame rate andmulticast IP/port settings for each profile.This page contains (by default) six different customizable encodingprofiles. This feature allows you to set six different video encodingcombinations, each with their own settings.On this page you can also add multiplied multicast/unicast streams fromeach encoder.Click this to see more settings.CommonName:Resolution:Video Encoder Configurations page._________________________________________________________User defined alias name for video profile (max 63 chars).Video resolution, either QCIF/CIF/2CIF/4CIF/Half D1 or D1.16 MPH100/400 series video encoders WebUI user manual
VBR (Variable Bit Rate) video aims atconstant quality, but as the bit ratefluctuates over time.CBR (Constant Bit Rate) videofluctuates in quality, while its multiplexingbehaviour is easy to predict.Because in unconstrained VBR videothe bit rate fluctuation might be toolarge, capped VBR video is proposedas an alternative. Capped VBR videoaims at a constant quality, but when incertain intervals this requires a toohigh bit rate, the bit rate is limited(i.e.,capped) in order to support morevideo flows on the links, at theexpense of a quality reduction.Note! Only even port numbers canbe used for RTP, and then thefollowing odd port number shall beused for RTCP (RFC 1889).UsageProfiles:MPEG-2 Options:P frame interval:GOP format:MPEG-4 Options:Simple profile:Video Encoder Configurations page._________________________________________________________Here you see how the media profile is assigned to a video source._________________________________________________________There are three options; Every frame = IP, Every second frame = IBP,Every third frame = IBBP.MPEG-2 GOP format._________________________________________________________Simple Profile (SP) is recommended only for decoder compatibility.Interlacing toolsets are not used.MPH100/400 series video encoders WebUI user manual 17
Page 1 and 2: User Manual - MPH100/400MPH series
Page 4 and 5: MPH Series Video Encoders Front and
Page 6 and 7: Getting startedQuick instructions11
Page 8 and 9: Ethernet InterfaceEthernet connecti
Page 10 and 11: Management Interface9 10 11 12 13 1
Page 12 and 13: Starting WebUI sessionTo create a W
Page 14 and 15: Configuring Video ChannelsVideo con
Page 16 and 17: 1. Video InterfacesClick “Video I
Page 20 and 21: Advanced simple profile:H.264 optio
Page 22: Video streaming performanceThe foll
Page 25 and 26: Configuring Data Channels9 10 11 12
Page 27 and 28: CommonName:Mode:Baud rate:Data bits
Page 29 and 30: ONVIF PTZ service1. In order to act
Page 31 and 32: CommonName:Input filter:Filtering t
Page 33 and 34: Video Analytics configuration isact
Page 35 and 36: CommonType:Module:Link status:Ether
Page 37 and 38: Local TimeTime zone:Local time:Syst
Page 39 and 40: The Real Time Streaming Protocol(RT
Page 41 and 42: Command Line Interface - CLIGeneral
Page 43 and 44: Connection methods - TCP/IPThis cha
Page 45 and 46: Devmgmt commandEnter the devmgmt co
Page 47 and 48: Network commandEnter the network co
Page 49 and 50: MPH featuresVideo MPH101/111 MPH102
Page 51 and 52: NotesMPH100/400 series video encode

MPH series video encoders - Teleste

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?