MPH series video encoders - Teleste

Connection methods - TCP/IPThis chapter describes how to connect to CLI via TCP/IP connectionusing Putty terminal emulator application. The same menus that aredisplayed on a local terminal are instantly available over an IP network.1. Start the PuTTY application. Wait until the following “PuTTY Configuration”window appears on the screen:Required settings:IP address:Device IP addressPort: 22Connection type: SSHPuTTY application view (Windows XP).2. Enter the device IP address into the “Host Name (or IP address)”address bar and click to continue.The following “PuTTY” window appears on the screen:Telnet program view.3. Enter the required user name and the password. The following“172.16.200.5 - PuTTY” window appears on the screen:The CLI connection to MPH series video encoder is now completed andyou can now use the CLI commands to management the device.The CLI connection can be terminated by entering command exit.MPH100/400 series video encoders CLI user manual 41