MPH series video encoders - Teleste

Video streaming performanceThe following performance table shows the performance ofMPH100/400 devices in encoding and streaming video signal pervideo input simultaneously.Total video sessions = original video stream + multiplied streams.SRTP (Secure Real-time Transport Protocol) = encrypted RTP stream.De-interlacing is done by choosing right profile.Configurations for single input in dual input devices (NTSC/PAL)MPEG-2/MPEG-4/H.264Encoder 1MPEG-2/MPEG-4/H.264Encoder 2MPEG-2/MPEG-4/H.264Encoder 3MPEG-2/MPEG-4/H.264Encoder 4DeinterlacePrivacyzonemaskingMotiondetectionTamperingTextoverlayTotalsessionsSRTPsessionsD1 30fps6Mbps4CIF 30fps6Mbps30 fps Yes40 chars/encoder3 3D1 30fps6Mbps4CIF 15fps6Mbps15 fps YesQCIF5fpsYes40 chars/encoder3 3D1 30fps6Mbps2CIF 30fps3MbpsYesQCIF5fpsYes40 chars/encoder3 3CIF 30fps1.5MbpsCIF 30fps1.5MbpsCIF 30fps1.5MbpsCIF 30fps1.5MbpsYesQCIF5fpsYes40 chars/encoder4 4Configurations for single input in single input devices (NTSC/PAL)MPEG-2/MPEG-4/H.264Encoder 1MPEG-2/MPEG-4/H.264Encoder 2MPEG-2/MPEG-4/H.264Encoder 3MPEG-2/MPEG-4/H.264Encoder 4DeinterlacePrivacyzonemaskingMotiondetectionTamperingTextoverlayTotalsessionsSRTPsessionsD1 30fps6MpbsD1 30fps 6Mpbs4CIF 30fps6Mbps4CIF 30fps6Mbps30fpsYesQCIF5fpsYes40 chars/encoder8 4Available video streaming performance for MPH100/400 series encoders.Note! Video traffic could overload Fast Ethernet throughputdepending on number of streams/bitrate combination. Be surethat the configuration does not exceed Fast Ethernet portthroughput. E.g. as an example: MPH102 number of encodedstreams 32, bitrate 4000 kbps = 128 Mbps -> Fast Ethernetthroughput is exceeded.20 MPH100/400 series video encoders WebUI user manual