MPH series video encoders - Teleste

Video Analytics configuration isactivated if the configuration isincluded in at least one of the profiles.Note! Profile does not needto be activated when configuringvideo analytics settings.User can add/remove rules(maximum of 5 rules are supportedper configuration).CommonType:Name:UsageProfiles:ParametersEngine Cfg Name:Sensitivity:Learning time:Mask:RulesType:Name:Threshold (0%..100%):Messages:Video Analytics ConfigurationsClick “Video Analytics” under the Media Configuration menu. VideoAnalytics Configurations page appears on the screen. Video Analyticssettings can be configured on this page. All the parameters can beconfigured dynamically i.e. when video analytics configuration is active._________________________________________________________Adaptive motion detection.User defined name for video analytics configuration object (max 64 chars)._________________________________________________________Not Supported._________________________________________________________User defined name for video analytics engine configuration (max 64 chars).Motion detection algorithm sensitivity. Range is 1-100%Motion detection algorithm learning rate.When monitoring an area for security, there may be certain parts withinthe camera’s field of view that need to be kept private. Masking is afeature that enables these areas to be concealed from view._________________________________________________________Motion detection threshold.User defined name for rule (max 64 chars).Threshold percentage to trigger rule. Range is 0-100%MPH100/400 series video encoders WebUI user manual 31