MPH series video encoders - Teleste

Local TimeTime zone:Local time:System time:Time SourceMode:NTP infoStatus:Current NTP servers:Manual timeSet UTC time:Time & Date FormatDate:Time:Date & Time SettingsClick “Date & Time” under the Administration menu. Date & TimeSettings page appears on the screen. Device’s Date & Time settingscan be changed on this page. This page also shows the system time andthe local time calculated using the time zone set on the device._________________________________________________________Selected time zone. Defines how conversion from system time (UTC) tolocal time is done. For user the local time is shown, for example in videotext overlay timestamps. Conversion also takes daylight saving time into account.Shows local time.Shows system time (allways in GMT)._________________________________________________________Source for the clock, either manual or NTP synchronized._________________________________________________________NTP status (synchronization OK, No NTP servers configured).Shows configured NTP servers IP address._________________________________________________________Set UTC time manually._________________________________________________________Select date format type.Select time format type.Notes! If month is entered as 14, the date will change to Februaryof the next year and if date is entered as 32, the date will changeto the 1st of the next month if the number of days in the currentmonth is 31.The date and time entered in the boxes has to match the formatspecified. If the required date is 1st Jan 2011 , it has to be enteredas 01/01/2011 and not as 1/1/2011. The latter setting will throw upan error when saved.MPH100/400 series video encoders WebUI user manual 35