Thecus N5500 User's Manual

Part I - Setup a DynDNS Account1. Go to http://www.dyndns.org from your home PC.2. Click on the Sign Up Now link.3. Check the Check boxes, select a user name (i.e.: N5500), enter your emailaddress (i.e.: xxx@example.com), check Enable Wildcard, and create apassword (i.e.: xxxx).4. Wait for an email from www.dyndns.org.5. Open the email and click on the link to activate your accountPart II - Enable DDNS on the Router1. Go to the router setup screen and select IP Config > MiscellaneousDDNS Setting from your Home PC.2. Click on Yes for Enable the DDNS Client?3. Select www.dyndns.org.4. Go to router setup screen, and enter the following information:a. User Name or E-mail Address: xxx@example.comb. Password or DDNS Key: xxxxc. Host Name: www.N5500.dyndns.orgd. Enable wildcard? Select Yese. Update Manually: Click UpdatePart III - Setting up Virtual Servers (HTTPS)1. Navigate to NAT Setting > Virtual Server.2. For Enable Virtual Server?, select Yes3. Setup the HTTPS Servera. Well-Known Applications: Select User Definedb. Local IP: Enter 192.168.1.100c. Port Range: 443 (the default HTTPS port setting on the N5500)d. Protocol: select TCPe. Click Add.f. Click Apply.4. Test the HTTPS connection from another computer on the Interneta. From a remote computer, open your browser and enterhttps://www.N5500.dyndns.orgb. You should see the login page of N5500.Firewall Software ConfigurationIf you are using a software firewall (i.e. Norton Internet Security) and are havingtrouble connecting to the N5500, you can try the following steps:1. Double click the NIS icon on system tray, and then configure the PersonalFirewall.2. On the Programs page, find the SetupWizard.exe and change itspermission to "Permit All". If it's not in the program list, use the Add orProgram Scan buttons to find it.3. On the Networking page, manually add N5500 IP address (i.e.192.168.1.100) to the Trusted list.115