You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
NOTEIn a multiple RAID configuration, one RAID volume must be designated as theMaster RAID volume. The Master RAID volume will store all installed modules. Ifthe Master RAID is changed to another location (i.e. assigning volume 2 to bethe Master RAID volume after volume 1 had been previously assigned), then allmodules must be reinstalled. In addition, all system folders that were containedon the Master RAID volume will be invisible. Reassigning this volume to be theMaster RAID will make these folders visible again.5. Specify a stripe size — 64K is the default setting.6. Specify the percentage allocated for user data by drag the horizontal bar.The remaining space will be made available for target USB or iSCSI.7. Selected the file system you like to have for this RAID volume. The selectionis available from ext3, XFS and ZFS.NOTE.Select ZFS file system while snapshot is needed. It is only one ZFS file systemallowed to be created per system..ZFS file system is only accessible by CIFS/SMB, not for AFP and NFS users..XFS file system is not support folder quota feature8. Press Create to build the RAID storage volume.52
Change language