Thecus N5500 User's Manual

ACL settingItemDenyRead OnlyWritableRecursiveDescriptionDenies access to users or groups who are displayed in this column.Provides Read Only access to users or groups who are displayed inthis column.Provides Write access to users or groups who are displayed in thiscolumn.Enable to inherit the access right for all its sub-folders.To configure folder access, follow the steps below:1. On the ACL screen, all network groups and users are listed in the left handcolumn. Select a group or user from this list.2. With the group or user selected, press one of the buttons from the threeaccess level columns at the top. The group or user then appears in thatcolumn and has that level of access to the folder.3. Continue selecting groups and users and assigning them access levels usingthe column buttons.4. To remove a group or user from an access level column, press the Removebutton in that column.5. When you are finished, press Apply to confirm your ACL settings.NOTEIf one user has belonged to more than one group but different privilege thanthe priority Deny > Read Only > WritableTo setup sub-folders ACL, click on “ ” symbol to extract sub folders list as screenshot shows below. You may carry on with same steps as share level ACL setting.70