12.07.2015 Views

Thecus N5500 User's Manual

Thecus N5500 User's Manual

Thecus N5500 User's Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

System NetworkUse the System Network menu to make network configuration settings as well asservice support settings.WAN ConfigurationFrom the System Network menu, choose WAN, and the WAN Configurationscreen appears. This screen displays the network parameters of the WANconnection. You may change any of these items and press Apply to confirm yoursettings. See a description of each item in the following table:WAN ConfigurationItemDescriptionHost nameHost name that identifies the <strong>N5500</strong> on the network.Domain name Specifies the domain name of the <strong>N5500</strong>.WINS ServerTo set a server name for NetBIOS computer.MAC AddressMAC address of the network interface.Jumbo Frame Support Enable or disable Jumbo Frame Support of the WAN interface on your<strong>N5500</strong>.IP Sharing Mode When enabled, PCs connected to the LAN port will be able to access theWAN.Link Aggregation Specifies whether WAN and LAN ports will be aggregated and act as oneport.Load Balance: Ethernet traffic will flow alternative between two Ethernetports.Failover: When one port fails, the other one will take over.802.3ad: Linkage two Ethernet ports in parallel to increase throughput.Set IP Address by: You can choose a static IP or Dynamic IP, and input your networkStatic / Dynamic configuration.IPIP address of the WAN interface.Netmask Network mask, which is generally: 255.255.255.0GatewayDefault Gateway IP address.DNS ServerDomain Name Service (DNS) server IP address.39

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!