Thecus N5500 User's Manual

More documents

Recommendations

Info

NOTEMigrating a RAID volume could take several hours to completeWith RAID level migration function, it has two different type “On line” and “Off line”alone with limitation as listed below.1. During RAID level migration, it is not allowed reboot or shutdown system.2. Off line RAID level migration, all services will stop and data is inaccessible.3. To have ZFS file system created doing on line RAID level migration from R1to R5 or R1 to R6, the all services will restart and volumes “user data”,“iSCSI” and “Target USB” are read only during operation.4. To have ext3 and XFS file system created doing on line RAID levelmigration from R1 to R5 or R1 to R6, the all services will restart andvolumes “iSCSI” and “Target USB” are read only but “user data” is capableread / write during operation.5. The other combination to make as “On line” can have read / write work asnormal.Below is a table listing of possible RAID migration schemes:ToFrom RAID 0 RAID 5 RAID 6RAID0[OFFLINE][RAID 0] HDDx2 to [RAID 0] HDDx3[RAID 0] HDDx2 to [RAID 0] HDDx4[RAID 0] HDDx2 to [RAID 0] HDDx5[RAID 0] HDDx3 to [RAID 0] HDDx4[RAID 0] HDDx3 to [RAID 0] HDDx5[RAID 0] HDDx4 to [RAID 0] HDDx5[OFFLINE][RAID 0] HDDx2 to [RAID 5] HDDx3[RAID 0] HDDx2 to [RAID 5] HDDx4[RAID 0] HDDx2 to [RAID 5] HDDx5[RAID 0] HDDx3 to [RAID 5] HDDx4[RAID 0] HDDx3 to [RAID 5] HDDx5[RAID 0] HDDx4 to [RAID 5] HDDx5X58
RAID1[OFFLINE][RAID 1] HDDx2 to [RAID 0] HDDx2[RAID 1] HDDx2 to [RAID 0] HDDx3[RAID 1] HDDx2 to [RAID 0] HDDx4[RAID 1] HDDx2 to [RAID 0] HDDx5[RAID 1] HDDx3 to [RAID 0] HDDx4[RAID 1] HDDx3 to [RAID 0] HDDx5[RAID 1] HDDx4 to [RAID 0] HDDx5[RAID 1] HDDx4 to [RAID 0] HDDx5[ONLINE][RAID 1] HDDx2 to [RAID 5] HDDx3[RAID 1] HDDx2 to [RAID 5] HDDx4[RAID 1] HDDx2 to [RAID 5] HDDx5[RAID 1] HDDx3 to [RAID 5] HDDx4[RAID 1] HDDx3 to [RAID 5] HDDx5[RAID 1] HDDx4 to [RAID 5] HDDx5[ONLINE][RAID 1] HDDx2 to [RAID 6] HDDx4[RAID 1] HDDx2 to [RAID 6] HDDx5[RAID 1] HDDx3 to [RAID 6] HDDx4[RAID 1] HDDx3 to [RAID 6] HDDx5[RAID 1] HDDx4 to [RAID 6] HDDx5RAID5X[ONLINE][RAID 5] HDDx3 to [RAID 5] HDDx4[RAID 5] HDDx3 to [RAID 5] HDDx5[RAID 5] HDDx4 to [RAID 5] HDDx5XRAID6X X [ONLINE][RAID 6] HDDx4 to [RAID 6] HDDx5Space AllocationYou may specify the space allocated for both Target USB and iSCSI volumes. TheiSCSI volume can be created up to 5 volumes per RAID volume.To do this, under the Storage menu, click RAID and the RAID List windowappears. Select the RAID volume you wish to reallocate by clicking on its radiobutton, and click Space Allocation. The RAID Information and VolumeAllocation List windows will appear.The Volume Allocation List displays the space allocated for Target USB and iSCSIvolumes on the current RAID volume. The N5200PRO supports up to five iSCSIvolumes.Volume Allocation ListItemDescriptionModifyClick this to modify the allocated space.DeleteClick this to delete the allocated space.iSCSI TargetClick to allocate space to iSCSI volume.Target USBClick to allocate space to USB volume.TypeType of volume. Can be either USB or iSCSI.NameName assigned to the volume.CapacityCapacity of the allocated space.59
Page 1 and 2:
Thecus N5500FW v3.00.08User’s Man
Page 3 and 4:
Safety WarningsFor your safety, ple
Page 6 and 7:
Snapshot ..........................
Page 8 and 9: Appendix F: Licensing Information .
Page 10 and 11: Media ServerWith the built-in Media
Page 12 and 13: Front PanelThe Thecus N5500’s fro
Page 14 and 15: Rear PanelThe N5500 rear panel feat
Page 16 and 17: 3. Press the power button on the Fr
Page 18 and 19: Chapter 3: First Time SetupOverview
Page 20 and 21: NOTEThe Thecus Setup Wizard is desi
Page 22 and 23: Step 1: Network SetupFrom the Web A
Page 25 and 26: Menu BarItemDescriptionSystem Infor
Page 27 and 28: Product InformationItemDescriptionM
Page 29 and 30: Truncate All Log File Clear all log
Page 31 and 32: Firmware UpgradeFrom the menu, choo
Page 33 and 34: Example - Monday: On: 8:00; Off: 16
Page 35 and 36: See the following table for a detai
Page 37 and 38: To perform a file system check, cli
Page 39 and 40: System NetworkUse the System Networ
Page 41 and 42: DHCP Server ConfigurationA DHCP ser
Page 43 and 44: NFS SetupFrom the System Network me
Page 45 and 46: A description of each field follows
Page 47 and 48: UPnPThis device supports UPnP Media
Page 49 and 50: NOTEWhen the Status shows Warning,
Page 51 and 52: RAID InformationItemDescriptionMast
Page 53 and 54: NOTEBuilding a RAID volume may take
Page 55 and 56: Remove RAIDClick to remove the RAID
Page 57: Migrating a RAIDOnce a RAID volume
Page 61 and 62: UsernamePasswordPassword ConfirmEnt
Page 63 and 64: Allocating Space for Target USB Vol
Page 65 and 66: Adding FoldersOn the Folder screen,
Page 67 and 68: WARNINGAll the data stored in the f
Page 69 and 70: The N5500 snapshot is supported tot
Page 71 and 72: NOTEThe ACL can be set for share an
Page 73 and 74: Once IP with volume have been set,
Page 75 and 76: Click Apply to save your changes.B.
Page 77 and 78: E. Reconnect a Stack TargetThe enab
Page 79 and 80: After you have completed to add ISO
Page 81 and 82: A description of each item follows:
Page 83 and 84: NOTEAll users are automatically ass
Page 85 and 86: Add Groups1. On the Local Group Con
Page 87 and 88: Application ServerThe N5500 support
Page 89 and 90: Windows VistaTo set up the Printer
Page 91 and 92: If your printer model is not listed
Page 93 and 94: User ModuleThe user module is reser
Page 95 and 96: Password on TargetServerTest Connec
Page 97 and 98: 2. When the Welcome to Microsoft Wi
Page 99 and 100: 6. To create a new folder within th
Page 101 and 102: Windows XP Publishing WizardThere a
Page 103 and 104: 7. Your PC will start to connect to
Page 105 and 106: 14. When the upload is finished, th
Page 107 and 108: Creating AlbumsTo create a photo al
Page 109 and 110:
1. Choose Go > Connect to Server…
Page 111 and 112:
7. Start the iSCSI Initiator by dou
Page 113 and 114:
13. Click on Disk Management and yo
Page 115 and 116:
Part I - Setup a DynDNS Account1. G
Page 117 and 118:
Chapter 7: TroubleshootingForgot My
Page 119 and 120:
Chapter 8: Revision Updates (FW 3.0
Page 121 and 122:
NOTE1. With RAID volume encryption
Page 123 and 124:
Now you can start to create iSCSI t
Page 125 and 126:
iSCSI target volume creation. The m
Page 127 and 128:
Chapter 9: Revision updated up to F
Page 129 and 130:
Updated Main User InterfaceThe look
Page 131 and 132:
enable the sync target server and i
Page 133 and 134:
Appendix A: Product SpecificationsH
Page 135 and 136:
Appendix B: Customer SupportIf your
Page 137 and 138:
RAID 5RAID 5 offers data security a
Page 139 and 140:
Appendix D: Active Directory Basics
Page 141 and 142:
Brand Series Model NotesFideltronik
Page 143 and 144:
NOTE• The UPSes marked Blue have
Page 145 and 146:
CGIC License TermsBasic LicenseCGIC
Page 147 and 148:
these conditions, and telling the u
Page 149:
9. The Free Software Foundation may
show all

Thecus N5500 User's Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?