BROOKFIELD DV-II+ PROGRAMMABLE VISCOMETER Operating ...

More documents

Recommendations

Info

Appendix K - Warranty Repair and ServiceWarrantyBrookfield Viscometers are guaranteed for one year from date of purchase against defects in materialsand workmanship. They are certified against primary viscosity standards traceable to the NationalInstitute of Standards and Technology (NIST). The Viscometer must be returned to BrookfieldEngineering Laboratories, Inc. or the Brookfield dealer from whom it was purchased for no chargewarranty service. Transportation is at the purchaser’s expense. The Viscometer should be shipped inits carrying case together with all spindles originally provided with the instrument.For repair or service in the United States, return to:Brookfield Engineering Laboratories, Inc.11 Commerce BoulevardMiddleboro, MA 02346 U.S.A.Telephone: (508) 946-6200 FAX: (508) 946-6262http://www.brookfieldengineering.comFor repair or service outside the United States, consult Brookfield Engineering Laboratories, Inc.or the dealer from whom you purchased the instrument.For repair or service in the United Kingdom, return to:Brookfield Viscometers Limited1 Whitehall EstateFlex MeadowPinnacles WestHarlow, Essex CM19 5TJ, United KingdomTelephone: (44) 27/945 1774 FAX: (44) 27/945 1775sales@brookfield.co.ukFor repair or service in Germany, return to:Brookfield Engineering Laboratories Vertriebs GmbHHauptstrasse 18D-73547 Lorch, GermanyTelephone: (49) 7172/927100 FAX: (49) 7172/927105info@brookfield-gmbh.deBrookfield Engineering Labs., Inc. Page 72 Manual No. M/97-164-F1102
Packaging Instructions to Return a Viscometer for Repair or Calibration❏ Remove and return all spindles (properly packedfor shipping).❏ Clean excess testing material off the instrument.❏ Include MSDS sheets for all materials tested withFthis instrument.IG❏ Support pointer shaft with white, nylon shippingUcap, as shown in Figure K1, or with white plasticRshipping cap originally supplied with instrument.E❏ Pack the instrument in its original case. Cases areavailable for immediate shipment from Brookfield.KIf the case is not available, take care to wrap the1instrument with enough material to support it.Avoid using foam peanuts or shredded paper.❏ DO NOT send the laboratory stand unless there isa problem with the upright rod, clamp or base. Ifthere is a problem with the stand, remove theupright rod from the base and individually wrapeach item to avoid contact with the instrument. Donot put lab stand in viscometer carrying case.F❏ Fill out a copy of the Viscometer Information SheetInsert CONE/I or Tissue Paper(on page 74) with as much information as possiblePLATEGto help expedite your service. If you do not useUFoam this form, please include a memo indicating the typeRof problem you are experiencing or the service youEneed performed. Please also include a purchaseorder number for us to bill against.K❏ Package the instrument and related items in a strongbox for shipping. Mark the outside of the box withhandling instructions.Example: "Handle with Care" or"Fragile - Delicate Instrument"2For cone/plate instruments, please remove the cone spindle and carefully pack in placein the shipping case. If available, use the original foam insert or roll up one sheet oftissue paper (or similar) and place between the spindle coupling and cup assembly (seeFigure K2). This will help prevent damage in shipping.Brookfield Engineering Labs., Inc. Page 73 Manual No. M/97-164-F1 102
Page 1 and 2:
BROOKFIELD DV-II+PROGRAMMABLE VISCO
Page 4 and 5:
I.1 ComponentsComponent Part Number
Page 6 and 7:
I.4 InstallationNote: “IQ, OQ, PQ
Page 8 and 9:
SELECTDISPLAYSELECT DISPLAYSelects
Page 10 and 11:
II.GETTING STARTEDII.1AutozeroBefor
Page 12 and 13:
II.3SETSPEED Speed Selection, Setti
Page 14 and 15:
SR 40.0 20.1C6.0RPM % 15.6Figure 13
Page 16 and 17:
II.7 Temperature DisplayThe DV-II+
Page 18 and 19:
Non-Newtonian fluid behavior can re
Page 20 and 21:
OPTIONSTABOPTIONS/TAB - Toggles bet
Page 22 and 23: L°F(FAHRENHEIT)CGS UNITSL°C(CENTI
Page 24 and 25: III.2.3.2 Custom SpeedsPressing the
Page 26 and 27: III.3.1 Time to StopOn entry, the u
Page 28 and 29: standard print string to the attach
Page 30 and 31: However, upon starting the timed op
Page 32 and 33: Refer to Section IV for information
Page 34 and 35: CP 123.4 55.1C10 RPM PGM% 63.7Figur
Page 36 and 37: IV.2 Description of B.E.V.I.S. Comm
Page 38 and 39: Figure 67 shows the grid where the
Page 40 and 41: IV. 5 Example ProgramsThe following
Page 42 and 43: Appendix A - Cone/Plate Viscometer
Page 44 and 45: A.3 SETTING THE GAP1. Move the togg
Page 46 and 47: Appendix B - Viscosity RangesViscos
Page 48 and 49: The second consideration involves t
Page 50 and 51: container wall and the spindle surf
Page 52 and 53: Table D1 (continued)SC4-14 14 125 0
Page 54 and 55: Appendix E - Calibration Procedures
Page 56 and 57: 4) Allow 30 minutes for the viscosi
Page 58 and 59: Interpretation of Calibration Test
Page 60 and 61: many viscometer users the true visc
Page 62 and 63: Appendix G - CommunicationsWhen usi
Page 64 and 65: DV-II+Serial and Analog OutputsNo C
Page 66 and 67: UnpackingCheck carefully to see tha
Page 68 and 69: Appendix J - Fault Diagnosis and Tr
Page 70 and 71: ❏ No Recorder Response✓ Be Sure
Page 74 and 75: Providing us with the following inf
show all

BROOKFIELD DV-II+ PROGRAMMABLE VISCOMETER Operating ...

Create successful ePaper yourself

Delete template?

Save as template?