Pneumatic cylinders - Duncan Rogers

P1DCylinderStraight or elbow push-in fittings for Ø32-63 mmFor cylinder bore Ø32-63 mm, one connection is locatedon the body extrusion. The connector from the Moduflexvalve range is used for this connection. A matchingPrestolok 2 (plastic) fitting is used for the connectionat the end cover. Choose between straight or elbowfittings. The other end has a plug installed in the unusedcylinder port.Threaded connections for Ø80-125 mmCylinder bore Ø80-125 mm have two threaded connectionslocated in either end cover. The other end hasplugs in the cylinder ports. These plugs can be movedto the other end to suit the application.Mechanically protected ”drop-in” sensorsThe body extrusion, which is common to all P1D Cleanand P1D Flexible Porting cylinders, has recessed sensorgrooves in the side opening. The geometry has at thesame time been designed for ”normal” mechanicalsensor installation (similar to P1D Standard) and forthe built-in sensor system (P1D Clean). Use standardsensors in the usual way.Combine with P1D CleanFor compact applications with stringent hygienerequirements, P1D Clean can be combined with FlexiblePorting. This cylinder version complies with manydifferent requirements and offers new opportunities forcreating effective application solutions.1106.05www.parker.com/euro_pneumatic