Pneumatic cylinders - Duncan Rogers

P1DOrder code keyComplete working units – ready for installationSave time and costsNow you can save time and money when choosing, ordering,receiving and installing, by ordering a complete cylinder ratherthan having to order up to ten separate items.Everything under one part numberThe P1D range means more than major technical advances:we have made it incredibly simple to order P1D cylinders ascompletely equipped working units with all accessories fitted,ready to plug in. Everything under one part number, which youcreate with the help of the order code key.The right qualityThe new system saves a lot of time at every stage, fromordering to commissioning. You can also be sure of gettingexactly the same configuration every time. All accessories areguaranteed correctly fitted, with the correct tightening torque.Other examples from the wide range are a swivel eye bracketcombined with clevis bracket GA and guidance modules (plainor ball-bearing type).Piston rod mountingsOrder P1D with swivel eye bracket or clevisbracket of zinc-plated or stainless steel – orpossibly a Flexo Coupling. Other examplesfrom the wide range are a swivel eye bracketcombined with clevis bracket GA and rod guidancemodules (plain or ball-bearing type).Fittings or speed controlThe cylinders are available with factory-fitted elbowor straight push-in fittings from the Prestolok range(nickel-plated brass). Banjo speed control valves fromthe Parker PTF range are available as an alternative.Factory-fitted sensorsP1D Clean can be ordered with factory-fitted sensors.This is often an advantage for other cylinder versionsas well. These cylinders come with the sensorsmounted in the end positions. If needed, the sensorsare easy to adjust when installing the cylinders.Choose from a wide range of sensors – electronicor reed type, 3 or 10 metres of cable, 8 mm or M12connectors.Cylinder mountingsA mounting is almost always needed wheninstalling a cylinder. Take advantage of the opportunityto have factory-fitted mountings such as footbracket, flange, clevis bracket MP2/MP4, clevisbracket GA, swivel eye bracket or combinations ofthese. Sealing plugs can be fitted at the factory inunused end cover holes.16 17 18 19 20P 1 D – C 0 4 0 M S B 0 1 2 5 A L C N 6Piston rod mountingsCylinder mountingsFactory-fitted sensorsPiston rod thread according to ISOSpeed controls or fittings7706.05www.parker.com/euro_pneumatic