Pneumatic cylinders - Duncan Rogers

P1DCylinderThrough piston rodAll P1D cylinders can be ordered with a through piston rod.Order this design in position 9 in combination with the scraperring system as below.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15P 1 D – S 0 3 2 F S – 0 1 0 0End cover screwsStandard Stainlesssteel 22)Std scraperMetalavskrapare 25)HDPE scraper 23)FPM sscraperStd scraperMetalavskrapare 25)HDPE scraper 23)FPM sscraperFunction22) If stainless steel end cover screwsare selected, the piston rod nuts arealso supplied in stainless steel.23) For dry rod operation.25) The metal scraper ring requires ahard-chromium plated piston rodM Q D V A S H W Double-actingF R E B G T YZ Double-actingthrough rodExample of through piston rodP1D-S032FS-0100P1D Standard cylinder, bore 32 mm, with through piston rodP1D-T050FS-0125P1D Tie-Rod cylinder, bore 50 mm, with through piston rod3 and 4 position cylindersFactory-fitted 3 and 4 position cylinders can be ordered in tie-rod design P1D-T.Through going tie-rods fix the two cylinders into a compact unit.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20P 1 D – T 0 8 0 2 S – 0 2 0 0 N 0 2 5 0Cylinder versionS StandardC CleanF Flexible PortingT Tie-RodEnd cover screwsStandard Stainlesssteel 22)Std scraperMetalavskrapare 25)HDPE scraper 23)FPM sscraperStd scraperMetalavskrapare 25)HDPE scraper 23)FPM sscraperFunctionM Q D V A S H W Double-actingF R E B G T YZ Double-actingthrough rod2 4 6 8 – – – – 3 and 4 position cylindersC J K L – – – – Tandem22) If stainless steel end cover screwsare selected, the piston rod nuts arealso supplied in stainless steel.23) For dry rod operation.25) The metal scraper ring requires ahard-chromium plated piston rodEqual stroke – 3 position cylinderSpecify letter T in position 5 (P1D-T) and figure 2 in position 9(standard scraper ring)Unequal stroke – 4 position cylinderSpecify letter T in position 5 (P1D-T) and figure 2 in position 9(standard scraper ring)Specify the shortest stroke in the ordinary positions 12, 13, 14,15 and the longest stroke in positions 17, 18, 19, 20.Example of 3 and 4 position cylindersP1D-T0322S-0200SNNN4 P1D Tie-Rod cylinder with 3 positiondesign, swivel rod eye in zinc plated steel,factory installed plug-in fittings (Prestolok,nickel plated brass) for 4 mm tube.P1D-T0632S-0160 P1D Tie-Rod cylinder with 3 position designP1D-T0802S-0200N0250 P1D Tie-Rod cylinder with 4 position designwith stroke 200 mm and 250 mm.3606.05www.parker.com/euro_pneumatic