Pneumatic cylinders - Duncan Rogers

P1DOrder code key20-digit order code16 17 18 19 20S N N N 1)N17Cylinder mountings90° 0° 90° = shaft square to, 0° = shaft in line with ports 5)1 3 Flange MF1/MF2 in front endB 4 Flange MF1/MF2 in rear end2 K Flange MF1/MF2 in both endsF – Foot brackets MS1 (both ends)C U Clevis bracket GAE V Clevis bracket MP4S W Swivel eye bracketT Y Clevis bracket MP2L Z Clevis bracket MP2+MP4X 5 Clevis bracket MP2+pivot bracket with rigid bearingQ 0 Clevis bracket GA + pivot bracket with swivel bearingM A Clevis bracket GA +swivel eye bracketD 6 Centre trunnion MT4, mid position 6)G 7 Trunnion MT4, optional pos. (XV-meas. pos 18-20) 7)H P Trunnion flange in front endJ 8 Trunnion flange in rear endN None12-13-14-15Stroke (mm) e.g. 0100 = 100 mmOptional stroke lengths up to 2800 mm. Standardstrokes see table page 1820Speed controls orValve functionfittings for tube dimensionSpeed controls 17) ,Air actuatedSeries PTF4PB 16)X in both ends for tube 4 mm 15) A Air-Air, 5/2Y in both ends for tube 6 mm 15) B Air-Spring, 5/2Z in both ends for tube 8 mm 15) C Air-Air, 5/3, closed centre positionP in both ends for tube 10 mm 15) D Air-Air, 5/3, vented centreR in both ends for tube 12 mm 15) E Air-Air, 5/3, pressurised centrePush-in fitting, elbow type for: Electrically actuated internal supply4 Tube dimension 4 mm 15) F Elec-Elec, 5/26 Tube dimension 6 mm 15) H Elec-Spring, 5/28 Tube dimension 8 mm 15) K Spring-Elec, 5/2 20)0 Tube dimension 10 mm 15) M Elec-Elec, 5/3, closed centre position2 Tube dimension 12 mm 15) Q Elec-Elec, 5/3, vented centrePush-in fitting, straight type for: S Elec-Elec, 5/3, pressurised centre1 Tube dimension 4 mm 15) Electrically actuated external supply3 Tube dimension 6 mm 15) G Elec-Elec, 5/25 Tube dimension 8 mm 15) J Elec-Spring, 5/27 Tube dimension 10 mm 15) L Spring-Elec, 5/2 20)189 Tube dimension 12 mm 15)N NoneFactory-fitted sensorsFront end or left 11)Rear end or right 11)Front and rear endCable exitF R – 2 sensors 24 VDC pnp, 3 m cableG H – 2 sensors 24 VDC pnp, 10 m cableC S – 2 sensors 24 VDC pnp, 8 mm connector, 1 m cable 21)K L – 2 sensors Reed type, 3 m cableT V – 2 sensors Reed type, 10 m cableM Q – 2 sensors Reed type, 8 mm connector, 1 m cable 21)– – 3 3 sensors 24 VDC pnp, 8 mm connector, 1 m cable 21)– – Z 3 sensors Reed type, 8 mm connector, 1 m cable 21)– – 4 4 sensors 24 VDC pnp, 8 mm connector, 1 m cable 21)– – W 4 sensors Reed type, 8 mm connector, 1 m cable 21)6 12) 7 13) 8 14) No factory-fitted sensors P1D CleanN No sensors P1D (excl. P1D Clean)19Piston rod threadN According to ISO-standard 1)6 Internal piston rod thread17-18-19-204-position cylinders onlyStroke (mm) e.g. 0100 = 100 mmThe longest stroke in a 4 position cylinder.(Total stroke length up to max 2800 mm,see ordering example on page 36)1-25) Information notes see page 828106.05www.parker.com/euro_pneumatic