NEW - Sobel.rs

Sheet steel Carrier Railsfor Continuous Row InstallationSeries TRS 1000Applications:For rows of polyester dust-/waterprooflight fittings suspended from the ceiling,allowing an easy installation an assembly.Design:Profile carrier rails made from sheet steel,galvanized and painted in white on theoutsideLenghts:3065mm (TRS 1000/2) and4595mm (TRS 1000/3)Additional covering strip (TRS 1000 A)1538mmMounting accessories:Connection brackets (TRS 1000 V) – tobe ordered separately – allow joining theindividual rails up to any length required.The carrier rails can either be mounteddirectly to the ceiling by means of theceiling brackets (TRS 1000 D) or they canbe suspended from the ceiling by meansof hook (TRS 1000 S) in combinationwith chain (K 16 V).2 or 3 devices (TRS 1000 L) serve formounting a light fitting to the rail.The carrier rail can be covered with acovering strip (TRS 1000 A) and they canalso be closed at the ends withcaps (TRS 1000 E).TRS 1000…Sheet steel carrier rail systemsTypeArticle no.TRS 1000/2 90261 0001TRS 1000/3 90261 0002sheet steel carrier rail 3,065mm longsheet steel carrier rail 4,595mm longTRS 1000 STRS 1000 VTRS 1000 AMounting equipmentTRS 1000 V 90264 0001TRS 1000 D 90264 0006TRS 1000 S 90264 0002rail connectorceiling bracket for mounting the carrier railsrail suspension device with hook for chainTRS 1000 LTRS 1000 DTRS 1000 EK16 V 90048 0001TRS 1000 L P 90264 0008TRS 1000 A 90264 0004TRS 1000 E P 90264 0007chain 1m long with 2 eyelets for length compensationluminaire mounting device (1 pair)covering strip for the rail 1,538mmend cap for the rail (1 pair)Note:Most of our light fittings have got two entries atone end of the housing for looping the mainscable. Thus, the classical through-wiring systemis no longer required in many cases.Ambient temperatures of +40°C and higherrequire silicone through wiring of 2.5mm²cross-section.For T5 light fittings we strictly recommendthrough wiring systems of 2.5mm² cross-section.Through-Wiring SystemsRequired in all light fittings in case of continuous row installation!Through-wiring system inside the light fittings comprising two solidly installed multi-pole terminal blocks.Through-wiring systems should be installed at the factory since a subsequent installation of conductors orcables is subject to special conditions as per VDE 0100, section 559.Through-wiring systems:1,5mm 2 up to 10 A max.2,5mm 2 up to 16 A maxThrough-Wiring Systems Installed in the SCHUCH FactoryIf through-wiring systems are wanted, we supply our dustproof/waterproof light fittings with the followingstandard through-wiring systems:Ballasts VVG ECGThrough-wiring system 5 x 2,5mm 2 PVC 5 x 1,5mm 2 PVCThrough-wiring systems silicone or with different numbers of wires can be supplied upon request.Through-wiring systems for subsequent installation:TypeArticle no.Universal retrofit sets for 18/36/58 Watt fittingsDV/NS P 5 x 1,5 11831 0013DV/NS P 5 x 2,5 11831 0022DV/NS S 5 x 1,5 11831 0014DV/NS S 5 x 2,5 11831 00245 x 1,5mm 2 PVC, 105°C, for ECG-fittings5 x 2,5mm 2 PVC, 105°C, for VVG-fittings (conventional ballast)5 x 1,5mm 2 Silicone, 150°C, for ECG-fittings5 x 2,5mm 2 Silicone, 150°C, for VVG-fittings (conventional ballast)Through-wiring systems of different wire cross sections can be supplied upon request.Bitte Subject beachten to technical Sie die changes, Hinweise im misprints Technischen and errors. Anhang!Technische Änderungen, Druckfehler und Irrtümer vorbehalten.128