NEW - Sobel.rs

Sheet Steel Industrial Light Fitting for highambient temperatures and / -locationsSeries 3084 - 3086...More efficientwith new mirror opticsApplication:Locations with high ambient temperatures,with excessive dirt and dust exposureas well as high fire risk due to an accumulationof combustible dusts and fibres, biocompostworks (stainless steel version).Design:Housing: Sheet steel powder coated inlight grey (RAL 7035), operating gearbuilt-in and wired ready for connection.3085... HI DIM: Encapsulated ECG mountedto the outside of he housing (see picture).Safety glass: Hingeable without frame.Central locking system: Allen screw 5mmopposite the hinges.Reflector: Surface refined purest aluminium.Connection: 3 poles up to 4mm² in coveredside compartment of the housing.Connection terminal HI DIM:3084: 5 poles up to 4mm²3085: External Wieland plug system RST(connector is part of the delivery).Cable entry: 1 gland and 1 blanking plugM25 x 1.5 (on one side).Mounting system: 2 eye bolts M6Ambient temperature:3084 … +40°C max.3085 … +50°C max.3086 … +60°C max.Options: See „Further series / equipment“.NEWTechnical data:3084... CE EVGControl gear: ElectronicMains voltage: 220-240/AC3084 ...DIM DControl gear: ElectronicMains voltage: 220-240/ACDimming range: 100% - 50%(lamp ouput)Interface: DALI3084... HI DIM A and DIM FControl gear: ElectronicMains voltage: 220-240/ACDimming range: 100% - 50%(lamp ouput)Lamps released for dimming operation:BLV TopFlood Pulsstrike 250/400Interfaces:… DIM F: Radio interface forcontrol system NEDAP-SenzaFil… DIM A: 1-10V interface for analoguecontrol componentsDim settings at 1-10V interface:1.0 – 1.5V -> 50%1.5 – 8.5V -> 50% to 100%8.5 – 10.0V -> 100%SCHUCH quality - Your advantage:• robust industrial design for a reliable long term service– sturdy housing from sheet steel with high-grade powder coating for achieving agood corrosion resistance– plain walled enclosure of a dust resisting triangular shape without any external closureparts, fail-safe even if there is a high dust/dirt accumulation– safety glass: 5mm thick, no frame– sturdy central locking system with internal hinges– high-efficient mirror reflector system for high illuminances or a lower quantity of luminaires• easy installation and maintenance– very easy connection and lamp replacement due to the Original SCHUCH central locking system– spacious lamp and gear compartment, directly accessible• applicable at ambient temperatures up to +40/50/55/60°C (as per the equipment)Industrial Industrieleuchten Light Fittings3085... HI DIM (with encapsulated ECG)Energy cost savings25%55%Advantages of the versions for energy saving ceramic burner lamps Philips Master Colour Elite incomparison with Quarz burner lamp systems:• up to 25% energy cost savings due to reduced connection power• further 40% energy cost savings in the dim function with a 50% luminous flux• 66% maintenance cost savings due to a triple longer life of operation of the ELITE lamp• additionally improved degree of luminaire efficiency due to compact structural burner shape andmechanically precise lampholder systemAdvantages of the dimmable versions with radio or 1 – 10V interface forlamps BLV TopFlood Pulsstrike:• up to 50% energy savings in the dim function with a low decrease of luminous flux of about 20%• long life of ECG even at high ambient temperatures (≥ 50,000 hours at a failure rate of 0.2% per 1000 hours)• gentle lamp start• ECG and lamps from well-known European manufacturers• no restriction of the warranty for the lamps, release from BLV for the dimming range is availableVersion DIM F:• high flexibility through control of up to 200 light fittings in 32 groups per control unit• comfortable control per radio via the building control technics available without any additionalwiring investment (3085), with quite an extensive feedback of the light fitting and lamp operatingparameters e.g. lamp output, operating hours, temperature profile etc. via the control unitSubject Bitte beachten to technical Sie diechanges, Hinweise misprints im Technischen and errors. Anhang!Technische Änderungen, Druckfehler und Irrtümer vorbehalten.16503.09.2012