NEW - Sobel.rs

NEWModern LED Street Light Fittingfor side-entry and post-top mountingSeries 47... LEDApplication:Residential streets, by-roads and thoroughfares,collecting roads, main roads ofthe S- and ME illumination classes, roundabouts,traffic-calmed zones, factory streetsin industrial plants, car parks, gateways etc.Design:Housing: Die-cast aluminium, 2-parts, charcoalcoloured metallic matt powder coated(almost DB 702). Upper section with LED,optics; glass cover and electro kit, hingeableand detachable. Lower section withpole mounting system, adjustment of inclination,multi-function cable entry withpressure compensation system.Glass cover: Flat safety glass, thermallytempered.Optics: PMMA, light distribution in„Multi-Player Principle“.Electro kit: Glass fibre reinforced polyestercarrying all electrical components,mains connection terminal, isolating plugconnection and cable retainer, completelyremovable.Pole mounting device: Die-cast aluminium,universal system for post topmounting Ø 60/76mm and side entrymounting Ø 42/60mm x 100mm (inclination/posttop mouinting 0°, 5° and 10°(standard: 0°).Options:See „Further Series/Versions“.Electrical design:LED: 16, 32, 48 or 64 Highpower-LED 1W or 2,5W, neutral white, 4.000K.ECG: 220 - 240V, 50-60Hz, 350 or 700mA, start-up peak 108A/140µs, overvoltage protection4kV, excess temperature protection-, overload and short circuit protectionOutput reduction:Control phase (LR): For reducing the luminous flux to 50% in times of lowtraffic density. Control phase (LST) required. Switching via control phase (LST =230V: 100%; LST = 0V: 50%)Without control phase (LA): Autonomic dimming by integrated time settingelement. Reduced operation 50% between 22.00 and 4.00hUniform luminous flux function (CL): Luminous flux is kept uniform over the wholelife of operation of the LED.Ambient temperature: -30°C up to +40°CSchuch Quality – your advantage• inexorably energy efficient, economic and eco-friendly– up to 65% energy saving in comparison with inefficient installations with mercury vapour high pressure lamps– additional energy saving up to 60% by output reduction (LR or LA) down to 50% luminous flux– further energy saving up to 20% via the life of the LED by the uniform luminous flux function (CL).No luminous flux decrease due to the omission of the usual oversizing in new plannings.– pole distances up to 45m (LPH 4-6m) or up to 55m (LPH 7-12m)– optimal light distribution due to a highly efficient lens optics with „Batwing characteristics“– uniform illumination through the „Multi-Layer Principle“ i.e. every individual LED illuminates thewhole surface, the light curves of the individual LED are overlapping. No dark zones in the road if anysingle LED would fail and the uniformity of the illumination is kept.– the fitting can be used in many applications e.g. in residential streets, in local streets and in mainroads of the S and ME illumination classes.– optimal and energy efficient adaptation to the required situation of illumination by selecting the quantityof LED, the current feed as well as the adjustable inclination of the light fitting in case of post top mount– eco-friendly, no light emission into the upper half-space. „Dark-Sky“ requirements are fulfilled• high class quality, reliable long term application– housing made from corrosion resistant die-cast aluminium with weather-resistant powder coating– modern, extremely low profile housing design with smooth surface without any cooling fins, no depositof leafs nor dirt– optimal thermal management due to direct connection of the LED module to the housing, great coolingsurface, excellent heat dissipation– flat thermally tempered safety glass, impact strength IK 08, easy to clean, replaceable– an integrated pressure compensation system for a well defined „breathing“ of the luminaire safelyprevents the formation of condensation water inside the light fitting– ECG with high overvoltage protection, fail-safe due to overload, short circuit and excess temperatureprotection. In case of high wattage lamps additional temperature control system of the LED module• easy to install, to maintain and to retrofit– spacious and easy access to the connection chamber and to the electrical components thanks to thehinged upper casing, no painful overarm working– tiltable universal pole mounting system for post top and side entry mounting, no tools required– adjustable inclination of the light fitting 0°, 5° and 10° in case of post top mounting– removable multi-function cable entry for an easy pre-assembly of the connection cable (no tools required)– future orientated due to replaceability and retrofit of components under consideration of any technicalfuture trendBitte Subject beachten to technical Sie diechanges, Hinweise imisprints Technischen and errors. Anhang!Technische Änderungen, Druckfehler und Irrtümer vorbehalten.196