NEW - Sobel.rs

Large Area Steep Roof Compact Floodlightup to 1000WSeries 4084...NEWMore efficientwith new mirror opticsApplication:Industrial rooms and halls with high lightpoints or if high illuminances are required.Locations with high dust and dirt accumulationas well as locations with increasedfire hazard. Especially if the illuminatioin isto be dimmed and where applicable beactuated via radio control or conductionboundbuilding control (e.g. shipyard andaircaft hangars, foundries, roller mills andsmelteries, machine and handling halls,giant equipment production etc.).Design:Housing: Sheet steel powder coated inlight grey (RAL 7035).Control gear: Built-in up to 2x400W wiredready for connection. A 1000W ignitor isflange-mounted outside and the choke islocated in a separate box no. 1032 (pleaseorder separately).4084... HI DIM.:EVG: Encapsulated, mouned outside tothe housing.Safety glass: Frameless, hinged and tiltableCentral locking system: Hexagon socket,wrench size 5mm, hinges on the opposite side.Reflector: Surface refined purest aluminium.Connection terminal: 3-pole up to 4mm 2Connection terminal... HI-DIM:4084: 5 poles up to 4mm 24085: Exterior Wieland plug-system RST(bushing is part of delivery).Cable entry: 1 gland M25x1.5Mounting: 2 eye bolts M8Ambient temperature: +40°C max.Options: See „Further Series/Versions“.Technical data:4084... CE EVGBallast: ElektronicRated voltage: 220 - 240V AC4084... HI DIM A and DIM FBallast: ElektronicRated voltage: 220 - 240V ACDimming range: 100% - 50%(lamp output)Lamps released for DIM function:BLV TopFlood Pulsstrike 250/4004084 ...DIM DBallast: ElektronicRated voltage: 220 - 240V ACDimming range: 100% - 50%(lamp output)Interface: DALIInterfaces:… DIM F: Radio interface for control systemNEDAP-SenzaFiL… DIM A: 1-10 V interface for analoguecontrol componentsDim setting for 1-10V interface:1,0 - 1,5V -> 50%1,5 - 8,5V -> 50% to 100%8,5 - 10,0V -> 100%SCHUCH Quality – your advantage:4084... HI DIM .25%55%• up to 20% less light fittings with the same illuminance due to an optimized lamp setting and amirror material of high efficiency factor• robust industrial version for a reliable long term application– stable housing with high quality powder coating for good corrosion protection– plane housing of a very stable dust resistant triangle shape without any outer locking pieces– fail-safe even in case of high dust and dirt deposits– 5mm thick safety glass pane– stable central locking system with internal hinges– high efficient mirror reflector system for high illuminances or reducedquantity of light fittings• easy to instal and maintain– easy connection and lamp replacement due to original SCHUCH central locking system– spacious, directly accessible lamp and gear chamber• admissible ambient temperature: Up to +40°CAdvantages of the versions for energy saving ceramic burner lampsPHILIPS MASTER COLOUR ELITE in comparison with Quarz burner lamp systems:• up to 25% energy cost savings due to reduced connection power• further 40% energy cost savings in the dim function with a 50% luminous flux• 66% maintenance cost savings due to a triple longer life of operation of the ELITE lamp• additionally improved degree of luminaire efficiency due to compact structural burner shapeand mechanically precise lampholder systemAdvantages of the dimmable versions with radio or 1 – 10V interface forlamps BLV TopFlood Pulsstrike:• up to 50% energy savings in the dim function with a low decrease of luminous flux of about 20%• long life of ECG even at high ambient temperatures (≥ 50,000 hours at a failure rate of 0.2%per 1000 hours)• gentle lamp start• ECG and lamps from well-known European manufacturers• no restriction of the warranty for the lamps, release from BLV for the dimming range is availableVersion DIM F:• high flexibility through control of up to 200 light fittings in 32 groups per control unit• comfortable control per radio via the building control technics available without any additionalwiring investment (3085), with quite an extensive feedback of the light fitting and lamp operatingparameters e.g. lamp output, operating hours, temperature profile etc. via the control unitIndustrial Industrieleuchten Light FittingsSubject Bitte beachten to technical Sie die changes, Hinweise misprints im Technischen and errors. Anhang!Technische Änderungen, Druckfehler und Irrtümer vorbehalten.17103.09.2012