NEW - Sobel.rs

46/46AL... LEDwith high power LEDDesign:As standard version but:Flat plastic glass in an aluminium frame.Gear tray/heat sink: Aluminium, compactunit with LED, all electrical componentsand aluminium frame with glass pane,hingeable and detachable, (modular design),isolating plug connection to themains connection terminal, cable retainerLED: 18 or 30 high-power LED 1W or1.5W, 4,000K, integrated optics withIP65LPH4-6mWindload areaA = 0,11m 2batwing characteristics, light distributionas per the „Multi-Layer“ principle.LR (output reduction): For reducing theluminous flux to 50% in times of lowtraffic density. A control lead (LST) is requiredfor this purpose..This cycling procedurehappens via the control phase(LST = 230V: 100%; LST = OV: 50%)CL ( constant luminous flux function):Luminous flux is kept on a constant levelover the whole life of the light fitting.Advantages of LED-versions:• pole distances up to 36/32m (LPH 6m) with an illumination that complies with the standards.(Illumination class: S5/S4)• up to 56% energy saving in comparison with an 80W hpmv lamp with the same luminance intensityand the same pole distancesNEW • up to 60% additional energy saving by output reduction (half-night switching) via the controlphase. Total energy saving up to 80% (version..... LED LR)• optimal light distribution via an LED integrated optics (Batwing characteristics)• absolutely equal illumination through the “Multi-Layer” principle i.e. every individual LED illuminatesthe total area, the light curves of the individual LED are overlapping. Any failure of aparticular single LED will not create any dark zones in the road. The uniformity of the illuminationis keptNEW • no decrease of luminous flux during the whole life of operation of the LED (version 463001LED CL LR). More energy and cost savings of up to 21% are achieved by the omission of thegenerally usual “oversizing” in new project plannings• ECG with high over-voltage protection especially for application in outdoor areas• fail-safe due to overheating, overload and short circuit protection as well as due to the failureprotection fusing of each individual LED (no black out in case of a failure of any single LED)• eco-friendly, no light pollution in the upper space (“Dark-Sky” requirements are fulfilled)• future orientated with an easily interchangeable gear-tray system (modular concept)46 3001 LEDLEDType Article no. Qty. LED Power/ WeightW consumption ca. kg 6)46 1802 LED 46004 0279 18 x 1,5W 34W 8,746 3001 LED 46004 0270 30 x 1,0W 39W 8,846 3001 LED LR 1) 46004 0272 30 x 1,0W 39/18W 2) 8,946 3001 LED CL LR 1) 3) 46004 0274 30 x 1,0W 31 4) -39 5) W/14-18W 2) 8,9*) Light fittings with die cast aluminium housing: Please order types 46AL...1) ) With output reduction2) Output reduced operation3) With function of uniform luminous flux4) Initial value5) End of operating life6) Weights without packing materialEnergy costs in %Energy cost savingswith use of LED type 46 3001 LEDin comparison with series 46 8056%80%AußenleuchtenNote:The data given for the LED is relevant at thetime of print. Actual data is available upon request.Changes due to the technical progresscan be found in the internet underwww.schuch.de.The given values for energy saving are approximate.These are dependent on the individuallamps used and the built-in apparatus.Guaranty claims based on these data are excluded.Bitte Technical beachten changes, Siemisprints die Hinweise and errors im Technischen excepted. Anhang!Technische Änderungen, Druckfehler und Irrtümer vorbehalten.199