NEW - Sobel.rs

Reflector Light FittingsSeries 3169 - 3189..., 3038/3048...Application:Industrial halls, warehouses, workshopswith high ceilings, maintenance and assemblyshops, etc.Design:Upper section: Ventilated sheet steel,painted in light grey (RAL 7035), completewith control gear and ready wiredfor installation.Reflector: Pure alumium, axially symmetrical,surface finished with prismaticfacet structure or smooth (series3175/76... and 3038/48...).Safety glass: With retaining frame, hingeableand detachable(required in case of HI and CE lamp typesonly; if lamps w/o burst protection areapplied - please order separately.Connection terminal: 3 poles up to 2.5mm².Electrical connection: In upper housingwith hinged section. Mains terminalblock 3 x 4mm² with wire protection.Cable entry: 2 grommets for through wiringfor cables up to 17mm Ø. PVC insulatedcables may be used. (For30378-3038 use silicone insulated cable.)Mounting: By means of an eye bolt with18mm inner dia.Ambient temperature: Up to +30°C.Note:1. The light fitting series for metal halide lampsHIE ≥ 250 W may only be operated withouta safety glass when using lamps that areapproved for open fittings (e.g. OSRAM, HQI-EP …/D or PHILIPS HPI-Plus …-P).2. In cases where the lighting installation iscovered by DIN VDE 0108, the light fittingmust be secured by a second eyebolt (suppliedon request).3. For applications under high noise emissionrequirements please order the light fittingswith control gears and ignitors or ECG resp.oflow noise level.Technical data:3169/3189...CE EVGControl gear: ElectronicMains voltage: 220 – 240V/ACNEWSCHUCH Quality - your advantage:3169/3189 ...DIM DControl gear: ElectronicMains voltage: 220 – 240V/ACRange of dimming: 100% to 50%(lamp output)Interface: DALI• accurately manufactured quality product for long-term application• economical without compromise– facet reflector optimized for an application of tubular high pressure lamps of high light output. Incomparison with an hpmv lamp– up to 33% less light fittings i.e. lower energy costs and less capital investment when applying an HITlamp of the same luminous intensity– up to 50% less light fittings i.e. lower energy costs and less capital investment when applying an HCI-TT lamp (ceramic burner lamp) at the same luminous intensity• easy to install and to maintain– simple and quick connection thanks to a spacious upper section that can laterally be opened for reachingthe connection chamber with all electrical components– lamp replacement through hingeable safety glass pane without any tools• flexible with regard to the ingress protection by glass covers in IP54 or IP 65 versionsAdvantages of the version for energy saving ceramic burner lamps PHILIPS MASTERCOLOUR ELITE compared to quartz burner lamp systems:• up to 25% energy cost saving through reduced connection power• further 40% energy cost saving in the dimming operation with 50% luminous flux• 66% maintenance cost saving due to three times longer period of use of the ELITE lamp• additionally improved operating efficiency of the luminaire due to compact burner shape and mechanicallyprecize lampholder systemEneregy cost savingby application of the facet reflector with quarz or ceramic burner lampsEnergy costs in %(dim light operation)Easy and quick connection by spacious uppersection to be opened laterally.Subject Bitte beachten to technical Sie diechanges, Hinweise misprints im Technischen and errors. Anhang!Technische Änderungen, Druckfehler und Irrtümer vorbehalten.134 03.09.2012