NEW - Sobel.rs

541/3001/2501 LED/.direct lightingIP54LPH3-5mWindload areaA = 0,15m 2Application:541/3001 LED/R:Small squares, public parks, pedestrianareas, low traffic areas etc.541/2501 LED/A:Residential areas, residential and sideroads, food paths and cycle tracks, etc.Design:As standard design, but:With longer glass cylinder.LED: High-power LED module with heatsink and overheating protection, 30 or25 high-power LED, 1W, colour temperature4,000K.Reflector: Directional light with precisebalanced combination of optical lens system,high-polished reflectors and clearglass symmetrical (R) or asymmetrical (A).Insulation class: IILR (output reduction):For reducing the luminous flux to 50% intimes of low traffic density. A controllead (LST) is required for this purpose.This cycling procedure happens via thecontrol phase (LST = 230V: 100%;LST = OV: 50%)CL ( constant luminous flux function):Luminous flux is kept on a constant levelover the whole life of the light fitting.Options:Please see “Further Series/Equipments”Advantages of LED-version:• pole light point distances up to 31m (LPH 5m), with lighting which conforms to standards, illuminationclass S5 (version LED/A)• up to 66%/50% energy savings pro km and year in comparison with an 80W mercury vapour /50W sodium vapour lamp fluorescent lamp (version LED/A)NEW • additional eneregy saving up to 60% by output reduction. Total energy saving up to 89%(version LED/. LR)• optimal light distribution via lens system and high-polished reflectorsNEW • no decrease of luminous flux during the whole life of operation of the LED (version ... CL LR).More energy and cost savings are achieved by the omission of the generally usual “oversizing”in new project plannings• ECG with high over-voltage protection especially for application in outdoor areas• fail-safe due to overheating and overload protection• future orientated by easily interchangeable gear-tray system (modular concept)541/3001 LED/R541/2501 LED/ALEDType Article no. Qty. LED Power WeightW consumption ca. kg 6)541/2501 LED/A 11541 0083 25 x 1W 38W 7,1541/2501 LED/A LR 1) 11541 0085 25 x 1W 38/13W 2) 7,1541/2501 LED/A CL LR 1) 3) 11541 0087 25 x 1W 31 4) -38 5) W/11-13W 2) 7,1541/3001 LED/R 11541 0084 30 x 1W 47W 7,1541/3001 LED/R LR 1) 11541 0086 30 x 1W 47/16W 2) 7,1541/3001 LED/R CL LR 1) 3) 11541 0088 30 x 1W 38 4) -47 5) W/13-16W 2) 7,11) With light output reduction device2) Output reduced operation3) With constant luminous flux function4) Initial value5) End of operating life6) Weights without packing materialEnergy cost savings per km and yearusing LED module Series 541/2501 LED/Ain comparison with series 541/551 80WNote:The data given for the LED is relevant at thetime of print. Actual data is available upon request.Changes due to the technical progresscan be found in the internet underwww.schuch.de.The given values for energy saving are approximate.These are dependent on the individuallamps used and the built-in apparatus.Guaranty claims based on these data are excluded.energy cost in %80W HME25 x 1W LEDlight output reductionto 50%Bitte Subject beachten to technical Sie die changes, Hinweise im misprints Technischen and errors. Anhang!Technische Änderungen, Druckfehler und Irrtümer vorbehalten.222