NEW - Sobel.rs

543/2402 LED/.indirect lightApplication:543/2402 LED/R:Promenades, public parks, pedestrianareas, small squares, etc.543/2402 LED/B:Residential areas, residential and sideroads, footpaths and cycle tracks, lowtraffic areas, etc.Design:As standard version but:PMMA glass cover, frosted.LED: 24 high-power LED 1.5W, colourtemperature: 4,000K, heat sink, failureprotection with individual fusing of LED.Light control: Indirect light with anodizedsurface refined pure aluminium mirrorcrown reflector, either axially symmetricalIP54LPH3-5mWindload areaA = 0,15m 2(R) or bi-directional (B) light distribution.Connection voltage: 230V/50Hz.LR (output reduction): For reducing theluminous flux to 50% in times of lowtraffic density. A control lead (LST) is requiredfor this purpose..This cycling procedurehappens via the control phase(LST = 230V: 100%; LST = OV: 50%)CL ( constant luminous flux function):Luminous flux is kept on a constant levelover the whole life of the light fitting.Anschlussspannung: 230V/50Hz.Connection cable: Ready-made “Ölflex1mm²”, 4m long, 3 poles or 4 poles incase of output reduction.Advantages of the LED version:• pole distances up to 37/40m (LPH 4,5m) with an illumination that complies with the standards.Illumination class: S5 (version … LED/B)• up to 70/51% energy saving per km and year in comparison with a 125W hpmv lamp /70W hpsv lamp (version … LED/B)NEW • additional eneregy saving up to 60% by output reduction. Total energy saving up to 90%(version..... LED/B LR)• optimal light distribution via the lens system and the high-polished reflectorsNEW • no decrease of luminous flux during the whole life of operation of the LED (version... CL LR).More energy and cost savings up to 21% are achieved by the omission of the generally usual“oversizing” in new project plannings.• ECG with high over-voltage protection especially for application in outdoor areas• fail-safe due to overheating and failure protectiv fusing of each individual LED (no black outin case of failure of any single LED)• future orientated with an easily interchangeable gear-tray system (modular concept)543/2402 LED/B543/2402 LED/RLEDType Article no. Qty. LED Power WeightW consumption ca. kg 6)543/2402 LED/R 11543 0093 24 x 1,5W 41W 5,1543/2402 LED/R LR 1) 11543 0094 24 x 1,5W 41/15W 2) 5,2543/2402 LED/R CL LR 1) 3) 11543 0097 24 x 1,5W 33 4) -41 5) W/12-15W 2) 5,2543/2402 LED/B 11543 0095 24 x 1,5W 41W 5,1543/2402 LED/B LR 1) 11543 0096 24 x 1,5W 41/15W 2) 5,2543/2402 LED/B CL LR 1) 3) 11543 0098 24 x 1,5W 33 4) -41 5) W/12-15W 2) 5,21) With output reduction2) Output reduced operation3) With constant luminous flux function4) Initial value5) End of operating life6) Weights without packing materialOutdoor Außenleuchten Light fittingsNote:The data given for the LED is relevant at thetime of print. Actual data is available upon request.Changes due to the technical progresscan be found in the internet underwww.schuch.de.The given values for energy saving are approximate.These are dependent on the individuallamps used and the built-in apparatus.Guaranty claims based on these data are excluded.Energy cost savings per km and yearusing LED Series 543/2402 LED/Bin comparison with design 543/125 RSEnergy cost in %24 x 1,5W LEDwith asymmetriccrown reflectorlight outputreduction device50%Bitte Technical beachten changes, Sie misprints die Hinweise and errors im Technischen excepted. Anhang!Technische Änderungen, Druckfehler und Irrtümer vorbehalten.225