Manual - Pixord

GPIN trigger: Apply the sensor relays as trigger. Define the actions/parameters responding to an event- Alarm in: enable the GPINs as a sensor for the event triggering.- Alarm Out: Enable a relay output that will respond to a triggered sensor.- Normal state: set the relays’ initial status.- Pass alarm: as described in motion config.- Email notice: send email responding to a sensed event- Email attachment: send email with attached video file.- FTP storage: send video file to FTP server responding to a sensed event.- CGI alert: enable the CGI alert responding to a sensed event.- Period time / week: select the period of time/day in a week that the sensor will be activated.- 31 -